Member Info for LOTM-13

Harvests should have occurred by 28th June, 18th July, 9th August, 29th August & 18th Sept.

Yes 5 harvest cycles have passed since there was a single word from HUI on this matter. Absolutely disgraceful.

LOTM

Directors of WSBN simply have no credibility left.

They & multiple sub-contractors are in receipt of price sensitive information regarding what has been found in 25RSDD002.

Whether its good news or bad news they have a statutory duty to keep the market informed of events & they clearly are not doing so.

Its absolutely disgraceful & totally disrespectful to the company's shareholders

LOTM

They've had an awful 3 month's virtually none of the contracts they were hoping to get have come through. If it wasn't for that one contract of £1M they would be in serious trouble.

They need to close contract's & i didn't see anything in the RNS about the size of the pipeline of opportunities, maybe they've dropped that metric for now.

LOTM

For anyone in any doubt, I just happened to notice this morning that GEO who I think are drilling in the Patterson area as well to the east of where WSBN are but are targeting up to 1000M+ for there 4 drill holes, managed to drill the 1st one to 810M between an approximate start date of 2nd Sept - 15th Sept. ie around 13 day & WSBN have been drilling for 29 days now & want us to believe they haven't got to 550M yet !!!

What on earth is going on. Some serious questions need to be asked of the BOD because clearly something is amiss & their id deafening silence when it comes to official RNS updates.

Tweets will no longer cut-it, they've bought this BOD amply time to put there plans in place & then convey them to there shareholders, which they simply haven't done. Well the clock's gone red, times ran out, get those RNS's out now or its likely to be you who's shown the door at the 1st opportunity shareholders get to remove you from office.

LOTM

Hole 25RSDD002 started prior to 23rd August (as per D Lenigas tweet at the time) hole 25RSDD001 data for ending at 777M was released 21st August.

So if we said hole 25RSDD002 commenced at the start of day on 22nd August = 10 days in August

We then know from the picture of 09:38am Perth time on 11th September that the hole was at a depth of at least 344M & most likely 385M if not deeper. Those pictures were not from beside the drill rig so likely only cover to the end of the previous day's drilling having been moved to the logging area.

So that gives us 20 days of drilling (during which surface casing will have had to have been set & allowed to dry)

A worst case that is still over 17M a day, mid case over 19M a day & if indeed the core boxes on the table do show a 4x then over 20M per day.

A further 8 full days have passed since then, which works out at 136M on a worst case, 152M in the mid case or around 165M in the higher case.

Applying those numbers to the 385M number takes 25RSDD002 to 521M worst case, 537M mid case & 550M in the higher case by the end of shift on 18th September Perth time.

So its pretty inconceivable that by the end of shift on 19th August the company doesn't have at least its first indications as to what the cores within the Red Setter Dome hinge look like. Indeed they may even have reached the Breccia Pipe (providing the continuity of it goes where they expect it to).

Therefore to not get an RNS at some point today, would be very detrimental to WSBN & the BOD that's for sure, with another one likely on Monday after another 3 days of drilling, where even in the worst case they'll know if the Breccia Pipe is there or not.

So today is D-Day for 25RSDD002.

Drill Baby Drill

GLA

LOTM

Whisp3rs39,

I don't currently have the luxury of being in a position to split funds that way.

You do realise the Dome is 12km long & has 3 major faults running through it all NW-SE in direction just like the dome itself.

If this was oil & gas or Helium you'd be expecting the majority of the dome to be filled with those commodities provided there was a proper seal to it.

Obviously Gold & Copper etc will be different & to some extent whether it is a polymorph type play or sometime else, but it has massive potential, so I'm happy to let the drill & the assay do the talking.

LOTM

Hi Casper786,

What I'm finding strange is some of Lenigas's comments like this one from yesterday

"Different geology. But I have suggested Rincon do an MMT survey to see what is feeding the near surface ounces of gold that are being drilled up. Wishbone is different - MMT suggests that they are sitting on a massive gold Dome Structure."

I know it was to someone regarding Rincon, but to say "massive gold Dome Structure" with regard to Red Setter seems very strange, because I'm expecting to see a fair amount of CU in these assay's yet this is not the first time he's simply referred to gold & not hinted at CU.

I know the shallower holes aimed at the other feature to the north-east had some strange finds as well, most holes only really had gold assay figures of note in them yet there were a couple with good % of CU in them as high as 2.2%

So I'm fascinated to see what the cores actually contained, was there any Moly, PB ZN or Ag in them as well ?

Is it a Polymorph system or not ?

Drill Baby Drill

GLA

LOTM

Whisp3rs39,

I don't think you've grasped that WSBN could be a once in a lifetime opportunity !!!

Only there are no assay results to go on thus far, just the 277M of cores everyone has seen & lots of people "talking" in AUS about it ............

Drill Baby Drill

LOTM

Sharebel,

As far as your concerned no matter what the results are, the share price is going down, because that's what you've just said.

Even although most people who have researched the stock, know that the assay results from the 1st hole are only just a hint of what is to come, as other holes are drilled.

If they got 50M of 0.3% CU 0.3g/t AU in hole 1 I'd say that was a pretty good result to start with, but lets let the assay results do the talking, & the core pictures from hole 2.

LOTM

Sharebel,

I've already written a couple a weeks ago that it is 99% certain the assay results from hole 25RSDD001 will be bettered, starting with hole 2 most likely.

WSBN hadn't even got to 570 M when they said the geology there was sub-optimal, yet it was still god enough to continue drilling to 777M & wanting to deepen it further in due course.

Lets see what the 25RSDD002 cores look like.

Drill Baby Drill

GLA

LOTM

Looks like the 1st "news leak" has occurred & they were trying to scare people into parting with there shares late yesterday!

I posted this at 14:43 yesterday

"The clock continues to tick, the manipulation zone is very close to the end, if not already at by close of play today.

25RSDD002 at 9:38am Perth time on 11th Sept was at a minimum of 344M as seen in the top right core tray photo's https://pbs.twimg.com/media/G0jeILYXEAARl8l?format=jpg&name=4096x4096

There are at least 2 more piles of core tray's out of picture, most likely stacked to the left of the picture (there are lots of missing @ 9M gaps which is 2 trays of cores.

There are 10 or 11 trays stacked by the looks of it behind the 2 columns of 12 trays we see in the picture, (no way of telling if they have been labelled yet or not).

There are 10 core trays on the bench at approximately 4M per tray that is another 40M worth. not to mention any that are still stacked at the side of the drill rig on the ground or on its table that haven't been moved here.

So its pretty certain that very early on the 11th Sept, 25RSDD002 was at a length of at least 384M possibly around 424M or more.

Since then there has effectively been 6 days of drilling & coring & by market open tomorrow on 18th Sept over another half day of drilling at Red Setter.

Even assuming they are still on single shifts that would mean another 130M or 140M (around noon UK time tomorrow) to take into account.

Which means at that stage they are at something like 525 - 580M ............. possibly deeper......

So they will have at least an initial idea of what hole 2 looks like, they might even be in the Breccia Pipe again (assuming there interpretation of the data turns out to be correct). Maybe even know a lot more than that.

So watch out for all the manipulation that is going to occur as people try to get you to part with your shares on the cheap.

Drill Baby Drill

GLA"

LOTM

Hi news,

I read & reviewed all that information & if you had fully understood it, then you would know they are separate, it runs in a different direction to the Red Setter Dome. The features of the 2022 are clearly shown in several RNS & have nothing to do with the dome,

Anyway lets hope the Red Setter Dome comes up with some good results.

LOTM

News,

I'm sorry but what you've said about Red Setter is just nonsense.

The 3km of strike relates to the 12 holes drilled in 2022 that were focussed on something else, not the Red Setter Dome feature, which is approximately 12km long.

We have no idea as to strike length or any such thing for Red Setter Dome currently.

LOTM

There are so many ways "news leaks" could occur when you have multiple contractors onsite. Especially when everyone knows the results are potentially going to affect the share price significantly.

The BOD can only hold back official news for so long before they look stupid & incompetent & inquiries into who knew what & when will begin followed by the implications of those findings on them.

Instead of being open & honest & putting out "official" updates to the company's Shareholders they have chosen the route of a picture here & a picture there, which is a dangerous game to play & they will reap what they have sown, those pictures are factual evidence.

Everyone can count & form the right timeline from them.

No doubt big buy orders are trying to be filled as the last 90 mins of trading tick down minute by minute.

Drill Baby Drill

GLA

LOTM

The clock continues to tick, the manipulation zone is very close to the end, if not already at by close of play today.

25RSDD002 at 9:38am Perth time on 11th Sept was at a minimum of 344M as seen in the top right core tray photo's https://pbs.twimg.com/media/G0jeILYXEAARl8l?format=jpg&name=4096x4096

There are at least 2 more piles of core tray's out of picture, most likely stacked to the left of the picture (there are lots of missing @ 9M gaps which is 2 trays of cores.

There are 10 or 11 trays stacked by the looks of it behind the 2 columns of 12 trays we see in the picture, (no way of telling if they have been labelled yet or not).

There are 10 core trays on the bench at approximately 4M per tray that is another 40M worth. not to mention any that are still stacked at the side of the drill rig on the ground or on its table that haven't been moved here.

So its pretty certain that very early on the 11th Sept, 25RSDD002 was at a length of at least 384M possibly around 424M or more.

Since then there has effectively been 6 days of drilling & coring & by market open tomorrow on 18th Sept over another half day of drilling at Red Setter.

Even assuming they are still on single shifts that would mean another 130M or 140M (around noon UK time tomorrow) to take into account.

Which means at that stage they are at something like 525 - 580M ............. possibly deeper......

So they will have at least an initial idea of what hole 2 looks like, they might even be in the Breccia Pipe again (assuming there interpretation of the data turns out to be correct). Maybe even know a lot more than that.

So watch out for all the manipulation that is going to occur as people try to get you to part with your shares on the cheap.

Drill Baby Drill

GLA

LOTM

Interesting thought's from Upside Rebal

https://www.linkedin.com/posts/upside-rebal-b350a7252_drilling-gold-explorer-activity-7373641893198442496-l-4L

"Latest sats at Wishbone Gold Plc Red Setter Project 16/9/2025

Core Drilling Services Still on site, still #drilling must be +500m down hole 2 now.

Assays pending hole 2 update."

LOTM

FillToSpill,

The 2022 holes didn't drill above Red Setter Dome, they drilled to the north east of it targeting a different feature at that time, yes they got some reasonable results for a 1st drilling campaign there, but it had nothing to do with Red Setter Dome.

If you wanted to highlight something from the RNS's then you should have highlighted this .....

From 11th August 7am RNS most likely written on the 8th of August!

"Observed changes in bedding of the host rock, quartz-carbonate veining and sulphides of chalcopyrite and pyrite within zones down the hole, are very positive indicators. Overall, these suggest we are peripheral to the main hinge target, and a new hole will now be collared to the south-west of the current hole to focus on what is now thought to be the centre of the domal structure. This will be some 50-75 metres from the current drill hole.

Drilling is planned to test the current hole further to a depth of around 630 metres before shifting to the new hole.

Ed Mead, Wishbone Gold WA director, commented; "Seeing the quartz-carbonate veining and sulphides at the expected target depth is highly encouraging at this early stage of the drill program. Progress has been a little slower than originally expected due to the drill rig only drilling on day shift, however, processing of core on site and geological and structural logging is giving us real time information on the domal structural we are successfully targeting. This means that we are seeing the significant changes in the bedding of the host rock as we approached the 550m target depth, indicating folds associated with a dome. The zones of significant quartz-carbonate veining seen indicates the presence of hydrothermal fluids often associated with mineralisation. Chalcopyrite (copper sulphide), as blebs in the veining and within fractures, and some bleaching/alteration within the drill core is also seen as highly encouraging. Drilling continues."

They had just got as deep as the Breccia Pipe at @ 570M but didn't even know it was a confirmed Breccia Pipe at that stage, yet knew they need to drill a brand new hole because the geology in the cores was already telling them that !!!

GLA

LOTM

The clock is ticking, the manipulation zone is very close to the end, if not already at by close of play today.

25RSDD002 at 9:38am Perth time on 11th Sept was at a minimum of 344M (as seen in the top right core tray). There are at least 2 more piles of core tray's out of picture, most likely stacked to the left of the picture.

There are 10 or 11 trays stacked by the looks of it behind the 2 columns of 12 trays we see in the picture, (no way of telling if they have been labelled yet or not).

There are 10 core trays on the bench at approximately 4M per tray that is another 40M worth. not to mention any that are still stacked at the side of the drill rig on the ground or on its table.

So its pretty certain that early on the 11th Sept, 25RSDD002 was at a length of at least 384M possibly around 424M.

Since then there has effectively been 5 days of drilling & coring & by market open tomorrow on 17th Sept over another half day of drilling at Red Setter.

Even assuming they are still on single shifts that would mean another 110M - 120M (around noon UK time tomorrow) to take into account.

Which means at that stage they are at something like 500 - 550M ............. possibly deeper.

GLA

LOTM

I had to get it to start from scratch again & feed it all the pictures I had for hole 1

Corrected, date‑ordered master timeline

25RSDD001 (Hole 1) — RC pre‑collar 23RSRC001 to 300 m, DD tail to 777 m by 21 Aug

19 Jul: Early setup/coring; white twin‑column core rig; A‑frame “Pulling Rods” sign; blue sawhorses.

25 Jul: Rig in place; sump defined; water handling visible.

28 Jul: Blue tanks/pump; track patterns forming.

29 Jul: Wider pad context; container/windsock visible.

04 Aug: Three confirmed views (rig, core trays, black‑lined sump).

08 Aug: Ongoing coring; mature pad wear.

By 21 Aug: Composite TD 777 m (program completed).

Then the 25RSDD002 Pictures

Rig move window

21–22 Aug: Move from 25RSDD001 to 25RSDD002.

25RSDD002 (Hole 2) — DD, azimuth 210–250 range

23 Aug: Baseline (casing phase); large‑diameter rods in stacker; primary spoil in mast right‑rear quadrant; minimal clutter.

07 Sep: Two confirmed Hole 2 images; orange tanker consistently mast‑right; entry signage at approach road.

12 Sep: Four confirmed Hole 2 images; standard rods only; site‑office sign present; expanded pad clutter; oxidized spoil rind.

I then gave it the 3rd Sept pictures where it felt 2 were from hole 2 & one from 1 hole - so have been left as undetermined.

03 Sep: Three images — Unknown (same pad, location TBD). Note: spoil mounds run parallel to the pipe loader, which aligns with Hole 2’s geometry; kept unassigned pending decisive skyline/sump corroboration.

Even with data re-loaded from scratch it came up with the same answer as before for the distance between the 2 holes surface locations

4. Current best estimate

Distance: ~42 m centre‑to‑centre, with a conservative range of 30–60 m.

Bearing (provisional): NE–SW offset, exact grid bearing to be confirmed once we have Hole 2’s MGA collar.

GLA

LOTM

On feeding it the 2nd picture from 3rd Sept it say's it is 95% certain it is hole 2 ! it was 95% the first picture was hole 1, I've now told it to go away & re-evaluate all the data on those 2 pictures.

I'll wait for the outcome which it is taking some time to come to before giving it the 3rd picture.

LOTM