Member Info for LOTM-13

Now things get really interesting ..............

In all the pictures I gave Smart GPT5 to look at I did not give it the data from 3rd Sept until now, I've just feed it the first of these 3 pictures https://www.linkedin.com/posts/wishbone-gold-plc_redsetter-telfer-gold-activity-7369301477221249024-1uYi

It has come back with the following response.

"From the visual evidence, I’m confident this image is from Hole 1’s location rather than Hole 2.

Here’s why:

Key rig and equipment identifiers

The rig in your photo is white, truck‑mounted, with two tall vertical support columns on the left side of the mast, each carrying blue circular safety signs.

This exact configuration appears in your earlier Hole 1 images, but never in the Hole 2 set — Hole 2’s rig is yellow lattice‑mast style with guy cables, not twin white columns.

Foreground safety signage

The “⚠️ WARNING – PULLING RODS – EXCLUSION ZONE” sign on an A‑frame stand is unique to this shot and the Hole 1 set.

Hole 2’s pad signage in your images is the yellow “COLLISION ZONE” board on two poles — completely different style and mounting.

Ancillary layout

White pickup truck and another white vehicle parked in the background match the Hole 1 pad’s vehicle lineup.

The core trays on sawhorses in front of the rig are also a Hole 1 trait — Hole 2’s core/sample handling was on a metal table over blue tubs.

Lighting and horizon

The low‑angle, warm light (sunrise/sunset) and the open horizon with sparse low vegetation match the Hole 1 backdrop you’ve shown before.

Hole 2’s pad has a slightly denser treeline in one quadrant and more equipment clustered around the rig.

Conclusion: This is Hole 1 (23RSRC001) — the rig type, safety signage, and pad layout are all consistent with your earlier Hole 1 imagery and distinct from Hole 2’s setup."

As you know I said at that time that they were back deepening hole 1.

I will now feed it pictures 2 & 3 one at a time to see what it says about them, whether it confirms it more or changes its mind

LOTM

Accionista,

I asked smart gpt5 to calculate the following, the dip needed for a new hole drilled within 5M of hole 1 so that it would land between 50-75M southwest of hole 1 at a depth of 550M. To achieve your goal the hole would need to be drilled at 225 degrees (instead of the 210 degrees that hole 1 was drilled at & would need a dip from horizontal of between 82 & 85 degrees depending on what the actual distance at 550M is ie 50M, 62.5M 75M apart etc.

I then gave it the pictures from 25th July (which we know is hole 1 & the picture fro 12th Sept) it is at the exact same 70 degree angle. I then gave it the 23rd Aug picture which we know was them starting to drill hole 2 - it also is at a 70 degree angle (dip).

If you give it some leeway regarding being SW ie not exactly 225 degrees it suggests the hole be drilled at 230 degrees.

-------------

I then gave it numerous pictures we have of both the hole 1 location & the hole 2 location & asked to it check the surrounding bushes, trees, horizon etc & to give me its best guess as to the hole 2 location, this is what it came up with

What anchors the collar estimate

Primary: Image GPS overlays clustered at ~21°49′6″S, 122°1′50″E (consistent across multiple frames).

Secondary: Stable, fixed features across shots (pad entry track, container/water setup, vegetation/horizon profile, relative positions of vehicles).

Result: Provisional offset ~43 m at ~136° (SE) from Hole 1.

Provisional collar and confidence

Hole 2 collar (provisional): E 399,822.8; N 7,586,931.1; RL 289

Confidence envelope: ~±15 m radius until surveyed MGA is provided.

Now it might turn out to be completely wrong Accionista, but given all the pictures its viewed of the surrounding in multiple directions it thinks the holes are 43M apart!

We will in time find out how close to being right it was.

GLA

LOTM

Hi Accionista,

I don't know if you've seen this before or not ?

https://x.com/Upsiderebal/status/1955513397639872865/photo/1

Upside Rebal also posted another image from Red Setter which I don't appear to have saved unfortunately :( which shows the large cleared area around the drill location, I'm not a Linkedin or X user so older stuff is really hard for me to try & find you might be able to find it.

Given that picture & the known distance of 454M between the surface location of holes 1 & 3A (hole 2 & others could be used to check the Smart GPT5 distance figures to verify it, that suggested move distance is not large, in this 20-23M range.

LOTM

Hi Accionista,

You believe the drill holes are only 2-5M apart, in time we will get the surface co-ordinates of 25RSDD002. Just like we have for holes 1 & 3A.

Hole ID MGA E MGA N RL Dip Azimuth Final Depth

23RSRC001 399792 7586962 288 -70 210 300

23RSRC003A 399953 7587387 288 -60 200 270

But given the info in https://wishbonegold.com/wp-content/uploads/2025/04/WSBN-RNS-250425-Red-Setter-Gold-Dome-Target-To-be-Drilled-13km-From-Telfer-Gold-Mine-Dome-9y3t.pdf figures 4 & 5 and how tricky it clearly is to drill from surface, I personally doubt that they can have drilled them that close to each other (2-5M) with the risk of hitting hole 1 to great to do so.

There are a couple of other factors to take into account as well, hole 1 was meant to be at 210 degree's ie SSW but we can't tell from the public data how close to that angle they managed to stay for example if you took a straight line from the surface point to a length of 550M, is it 210 degrees between those point or a slightly different angle ?

If your also trying to create "measurable resource blocks" for JORG later, you really want to be drilling in straight lines not veering apart.

Yes there targeting the center of the Breccia Pipe ( & hopefully they achieve that) but we don't know how much further to the west the mineralisation will go before they reach the major fault that appears to be under the Dome as well.

Interesting times ahead for sure.

LOTM

I'm just trying to piece everything together to, I know at least 3 people here have written that they think the Core evaluation set-up is like 10-20km away, which I'm finding hard to believe.

I mean lets look back what were WSBN's plans back in the beginning of this drill campaign to deepen holes 1 & 3A - we know the plan was for hole 1 to go to around 630M & possibly the same for hole 3A. Hole 1 was already at 300M so that was roughly another 330M of core to be recovered & recorded etc, hole 3A was at 270M so maybe another 360M of core from it roughly, ie a total of roughly 700M of core.

So would they be moving that small amount of core to a location 10-20km away, I just don't see that happening they'd do it close to either the hole 1 or hole 3 sites which are like 455M apart in a straight line.

So if that's the case then the picture from 29th July https://media.licdn.com/dms/image/v2/D4E22AQHP3zwV0V2mHg/feedshare-shrink_2048_1536/B4EZhWwR4hGoA0-/0/1753802154774?e=2147483647&v=beta&t=Qg9pLhwYzZ9QS4HCSFw-dyBrN-oBuxqDNU3hrm2PcyM

Ties up with the one from 11th Sept

https://www.linkedin.com/posts/wishbone-gold-plc_wsbn-australia-westernaustralia-activity-7371831527216713728-dCM5

The only difference really being the direction they were taken SE as opposed to N, they are located in virtually the same spot, only they are vastly expanded now due to the new drilling program.

Given we know the surface location of hole 1 is located at MGA E 399792 & MGA N 7586962 I asked Smart GPT-5 the following

" if 23RSRC001 399792 7586962 = 347N 21496S 122149E then how far away from there is 345N 21501S 122946E ? "

Distance from 347N 21496S 122149E to 345N 21501S 122946E

Assuming these are orthogonal local axes with metre units:

ΔN: 345 − 347 = −2 m (2 m south)

ΔS: 21501 − 21496 = +5 m (5 m south)

Combine N/S into net northing: −2 m − 5 m = −3 m (3 m south)

ΔE: 122946 − 122149 = +797 m (797 m east)

Plan distance:

797

2

+

3

2

≈

797.0 m

Direction: Essentially due east (about 0.2° south of east)

So the second point is about 797 m almost due east (very slightly to the south) of the first."

So Smart GPT-5 believes the Core evaluation center has ben set-up around 800M east of hole 1's surface location

LOTM

Hi Accionista,

I to use my own observations from all the info that's in the public domain & supplement it with what Smart GPT-5 can tell me with regard to those observations & the public data.

For example https://wishbonegold.com/wp-content/uploads/2025/04/WSBN-RNS-250425-Red-Setter-Gold-Dome-Target-To-be-Drilled-13km-From-Telfer-Gold-Mine-Dome-9y3t.pdf in that document you can clearly see what happened to hole 3 from 2023 & how they re-directed it & why it is now 3A.

You can also see why they have chosen to deepen hole 1 & hole 3A & not hole 2 from 2023 as the angle it was drilled at has veered off in the wrong direction compared to the Red Setter Dome as we know ( if they think the Dome extends further north then they might be able to use it to get some of that information from it - otherwise it has turned out to be a waste of money back in 2023).

I think the results of holes 2 & 3/3A from 2023 show why they talked about drilling the new hole 25RSDD002 carefully to 150M before setting surface casing, to ensure it stayed on track & didn't get diverted - possibly this top 80M of Permian aged material is difficult to hold your course through.

https://wishbonegold.com/wp-content/uploads/2023/12/WSBN-RNS-231204-Mineralisation-over-3km-strike-at-Red-Setter-kmw2.pdf gives you the exact surface co-ordinates of the 2023 holes. So you can ask Smart-GPT5 or another AI to plot them & work out the distance between them. Hole 1 & hole 3A are 454M apart at surface.

Surface separation between collars

I calculated straight-line plan distances between the collars using the MGA Easting and Northing pairs (metres).

Pairwise distances

Hole 1 Hole 2 Distance (m)

23RSRC001 23RSRC002 299.54

23RSRC001 23RSRC003A 454.47

23RSRC001 23RSRC004 600.89

23RSRC001 23RSRC005 890.34

23RSRC001 23RSRC006 1189.86

23RSRC002 23RSRC003A 154.98

23RSRC002 23RSRC004 301.42

23RSRC002 23RSRC005 590.93

23RSRC002 23RSRC006 905.05

23RSRC003A 23RSRC004 146.46

23RSRC003A 23RSRC005 435.86

23RSRC003A 23RSRC006 760.19

23RSRC004 23RSRC005 289.56

23RSRC004 23RSRC006 627.98

23RSRC005 23RSRC006 397.85

LOTM

Hi Accionista,

The surface collars of hole 1 & hole 2 25RSDD002 are somewhere in the region of 30M apart from what Smart-GPT-5 has been able to work out, given the fact that at 550M depth, hole 2 should be located around 50-75M South-west from hole 1 (unless that has changed since that info came into the public domain).

Which makes it in many ways very difficult to tell which is which just because they are so close to each other.

This is upside rebals, view of things

https://www.linkedin.com/posts/upside-rebal-b350a7252_drilling-breccia-gold-activity-7371066808570888192-Piqq

For me personally the mound of earth in relation to the drill rod stacker is the key clue as to which is which hole.

The 12th of Sept pictures (because of the angles the pictures were taken at make it difficult) however in the 317NW one (pic 2) https://media.licdn.com/dms/image/v2/D4E22AQG-PQs3squAzw/feedshare-shrink_800/B4EZk8.Nv5HoAg-/0/1757664568743?e=2147483647&v=beta&t=uQTV742NXqCE6vncN0NcYjMxI63fh3TRfMAleh7_fuA

You can see that the earth mound is at 90 degrees to the white drill rod stacker, the same as in this picture from 23/08 https://x.com/WishboneGoldPlc/status/1959496344319496523/photo/1

The 3rd Sept picture shows the earth mound parallel to the drill rod stacker https://x.com/WishboneGoldPlc/status/1963198787834216751/photo/3

I hope that helps

LOTM

Hi news,

Can you post the link to this new tweet please?

Thanks

LOTM

The Herd hasn't been at WSBN for quite a few days now, if it was here then we would be seeing 10 trades a minute going through or like on the day it went close to 2p, 30 trades a minute at its peak.

At the moment its the big accumulators who are somewhat in control (unless the herd arrives & scuppers there plans) looks like they are soaking up everything the MM's will give them probably at 1.6p ahead of Monday.

I suspect we'll finish the day in the current range.

GLA

LOTM

Manifesto,

Why on earth would they be moving onto other sites ?

If you've found something special you stick with it & that's what there doing.

Following what the data is telling them, it would have been cheaper to deepen hole 3A than to drill the new 25RRDD002 hole, but the data is telling them the Breccia Pipe is dipping steeply to the south-west which is why they are drilling this new hole.

As for hole 1, its 99% certain that they will discover better grade intersects & length's in other holes they drill than the ones we eventually get for that hole. If they themselves (the intersects from hole 1) are commercial then they really have hit the jackpot.

Hole 2 will give them a first block of potential ore possibly measuring 75Mx80Mx220M

LOTM

Manifesto,

We've been over the Lenigas story before, I provided you with the evidence that he did in fact own WSBN shares after WSBN bought the tenement in 2020.

I can't prove he hasn't sold them, but you can't prove he has sold them either. So until you can the current data says he owns some WSBN shares.

As I also said at the time he & his partner in that deal may well have a small ORRI or NSR over the tenement as well, but the only way you're like to get an answer to that question is at an AGM or such like.

He's not a director, he's just an outside consultant.

As for anytime soon, well if you'd bothered to view all the core trays & what's written on them, then you'd know how deep the 2nd hole is already. So that statement of yours is totally misleading to say the least.

LOTM

Manifesto,

You seem a little confused, the 3km of strike was found through the drilling of 12 holes to the north east of the Red Setter Dome, which found gold & copper in those holes.

You do know the 6 holes you are referring to were never touched in 2024 & this is them back deepening some of them now (1 & 3A was the initial plan)

So the fact they were pre-collared, means the cost & time to drill them now is a lot less than would otherwise have been the case.

And since you've been doing so much research you'll know that another company is drilling deep holes a bit to the east of Telfer & they are drilling 4 holes to at least 1000M possibly more from scratch & doing it initially on a £1M budget.

WSBN have a far bigger budget than that.

LOTM

Lets be honest the vast majority of small trades that have gone through for the last 1 hour plus have been sells & yet the share price keeps doing the opposite it keeps rising !

The only reason for that to be so is that there has to be large buy orders in the background either being worked or being filled with all these small sells.

The clock is ticking, 3 hours of trading left, then you can't do anything until 8am Monday morning UK, by which time 2.5 days of drilling will have occurred at Red Setter Dome, not to mention the drilling that took place today after those pictures from 11:41 Perth time took place.

No-doubt new pictures to view over the weekend.

Drill Baby Drill

GLA

LOTM

News,

Like this https://pbs.twimg.com/media/G0oa0CdXMAERL3C?format=jpg&name=4096x4096

LOTM

Hi news,

When you see the image you want in the tweet, hover over it & right click it & ask it to open the image in a new tab, that should give you a much bigger picture of it & the ability to zoom in on it as well with the spyglass.

I hope that helps

LOTM

MM's & those desperate to build there holding's before close of play seem to be on edge now.

I mean sending in a new 7 day old account like JaneMtc, for her 1st post on WSBN to say that she's sold her position 7 hopes it goes lower!

Really

LOTM

Just look at the trades that are starting to show-up, buy's in the £10 -£15K range & that will be nothing compared to the size of the ones that you won't get to see until 5:15PM on Monday.

Would really love a Friday PM RNS just to catch the market unawares! & cause WSBN to be the major topic of conversation over the weekend.

GLA

LOTM

I very much suspect that there will be more pictures issued over the weekend & from all the information gleaned so far from yesterday's & today's pictures, they will drilling through the zone of interest before the LSE opens for business on Monday.

So you need to decide if you want to own WSBN shares ahead of the release of those pictures & probable RNS or want to see the outcome before deciding the choice is yours!

Drill Baby Drill

GLA

LOTM

A lot of people seem to be very confused by the facts.

The Original plan for 2025, for the company was to go back into holes 1 & 3A that had been collared back in 2023 & deepen them.

The plan with hole one was to drill to a depth of around 630M hoping to hit the Red Setter Dome at around 550M (an interval of just 80M that they were really interested in.

In actual fact they encountered the Dome hinge at 520M (30M earlier than hoped for) & then at 570M hit an unexpected Breccia Pipe, which continued all the way to 722M. They increased the intended depth they would drill to 3 times along the way eventually stopping at 777M still in ineralisation due to a shortage of drill pipe onsite.

From the information gained during the drilling of that hole they realised that they had in fact only found the outer edge of the Breccia Pipe & believe the centre of it lies to the south-west of hole one.

So instead of moving the rig to deepen hole 3 they chose to drill a new hole on the same hole 1 drill pad (something in the region of 30 - 75M to the south-west of that location). The aim of the new hole called -25RRDD002 - is to try & hit the centre of the Breccia Pipe where logic dictates any ore grades should be higher there than at the edges of the pipe. There first target is to be around 50M-75M southwest of where hole 1 is at a depth of 550M & then carry on drilling possibly to 1000M or more.

They will learn a lot of new information from this new hole, like where the dome hinge is tilting to the South-west or not, if it is then it might not hit the hinge until deeper than the 520M it took in hole 1. The Breccia Pipe is also believed to be south-west tilted & may also not be encountered to a depth of greater than 570M.

But just like in the first hole this 2nd hole may provide them with new factual data that isn't/wasn't expected.

The fact is Wishbone got "Wish Bone" lucky in all that was discovered in hole 1. A Breccia Pipe, 257M of mineralisation (how much of it is economically viable is yet to be found out) against an expectation of 80M or less !

Now Drill Baby Drill

LOTM

Accionista, & whoever else it was that said the location was like 10km plus away is talking absolute nonsense,

Will people please do a little proper research before making such "claims"

Smart GPt-5 what is the difference Between 345N 21501S 122946E (Core Tents) & drill hole location 347N 21496S 122149E ?

"Got it — those look like local grid coordinates (probably MGA94 / Zone 51 or a similar mine grid), not standard latitude/longitude. If we treat them as northing/easting pairs in metres, here’s the relative positioning:

Step‑by‑step

Point A: 345 N, 21 501 S, 122 946 E Point B: 347 N, 21 496 S, 122 149 E

Northing difference: 347 N − 345 N = +2 m → Point B is ~2 m north of Point A.

Southing difference: 21 496 S − 21 501 S = −5 m → Point B is ~5 m north in the S‑axis sense (so combined with above, it’s slightly north overall).

Easting difference: 122 149 E − 122 946 E = −797 m → Point B is ~797 m west of Point A.

Relative position

B is almost due west of A by ~0.8 km, with only a couple of metres’ difference in north–south position.

In plan view: if you stand at Point A and walk ~800 m west, you’ll be at Point B"

LOTM