RE: curious rises13 Aug 2021 10:17
wizard
Don't forget the radius of the drill which adds a considerable length to the MD. I believe that was in the region of approx 850ft from the vertical.
8th Oct 2019 07:00
the completion of the 12¼" diameter hole section in its Horse Hill-2 ("HH-2") Portland pilot well, 9?" casing has been set and cemented into position from surface to 2,019 ft below rig floor. After setting and testing blow out preventers, expected to be completed today, the well will drill a short section of 8½" diameter hole down to the coring point, where three 60 ft cores are planned through the oil bearing Portland reservoir.
Following the coring programme, designed primarily to acquire key technical data that will ensure the 1000m HH-2z horizontal section is correctly positioned within the Portland's most oil-productive zone, the well will drill ahead to total depth, be electric logged and then plugged back to the "kick-off" point, delineating the start of HH-2z's planned 1000m horizontal trajectory. HH-2z will follow directly afterwards.