Minco PLC Regulatory News (MIO)

MINCO ANNOUNCES NEW UPGRADED RESOURCE AT THE BUCHANS PROJECT, NEWFOUNLAND, CANADA

Dublin, 04 March 2013 - Minco plc (AIM - "MIO") (the "Company") is pleased to announce that a new resource estimate for the Lundberg base metal deposit in central Newfoundland, Canada has successfully upgraded the majority of the categorization of the resource, as well as increasing the overall tonnage to an Indicated resource of 23.44 million tonnes and an additional Inferred resource of 4.31 million tonnes,from the previously estimated Inferred resource of 21.82 million tonnes.

The new mineral resource estimate was completed by Mercator Geological Services Limited ("Mercator"), following the drilling by Minco of 58 new surface diamond drill holes totaling 8,184 meters in 2012, and is based on validated results from 231 diamond drill holes totaling 24,519 meters of diamond drilling.

The following table shows the new Indicated and Inferred resource tonnages and grades for the combined Lundberg and Engine House zones of the volcanogenic massive sulphide (VMS) deposit. 

TABLE 1: 2013 RESOURCE STATEMENT - TONNAGE AND GRADES*

"We are very pleased that Minco's 2012 drilling program on the Lundberg deposit successfully upgraded the majority of the previous Inferred resource to the Indicated category and that the overall tonnage of the deposit has been increased", said Terence McKillen, Chief Executive of Minco.

 "This new indicated resource now paves the way for the design of an open pit mining plan and more detailed metallurgical studies, leading towards the calculation of a mineable reserve and completion of a pre-feasibility study on the viability of building a mine and moving the Lundberg project into production."

Mercator used a Net Smelter Return ("NSR") calculator to generate NSR values for each block, based on interpolated block metal grades and using three-year (2010-2012) trailing average metal prices of $0.95/lb zinc, $1.00/lb lead, $3.68/lb copper, $29.00/ounce silver, and $1,493.65/ounce gold; metallurgical recoveries as projected in the Preliminary Economic Analysis (PEA) completed by Tetra Tech Wardrop in 2011; and using current smelter and shipping terms for similar concentrates.

The average Net Smelter Return value per tonne of mineralization was calculated to be $42.15/T for indicated resources and $35.95/T for inferred resources.

The resource statement uses a cut-off grade value of $15 NSR per tonne, which represents an estimated break-even cut off. It approximates the $14.80/tonne operating cost defined by Tetra Tech Wardrop, in the 2011 Preliminary Economic Assessment, which consists of a $2.27/tonne mining and $12.53/tonne processing cost.

As such, the NSR values, as calculated, represent the value of each resource block, assuming they were mined, milled and the concentrate produced was sold on standard smelter terms. All pricing reflects US currency.

The new resource, in which the Lundberg and Engine House zones are reported together under a single resource, and in which the majority of the previously reported Inferred resource has been upgraded to the Indicated category has significantly improved the quality of the Buchans project. The total contained metal is shown below in Table 2.

TABLE 2: 2013 RESOURCE STATEMENT - TOTAL METAL*

*Notes: Calculated as of February 22, 2013. Tonnages have been rounded to the nearest 10,000 tonnes. Mineral resources that are not mineral reserves do not have demonstrated economic viability. The estimate of mineral resources may be materially affected by environmental permitting, legal, title, taxation, socio-political, marketing, or other relevant issues.

In addition, the resource was expanded in the portions of the deposit located closest to surface in the eastern part of Lundberg zone and along the fringes of the previous inferred resource. A 3D oblique image showing the expanded resource is available on Minco's website at http://www.minco.ie.

ESTIMATION METHODOLOGY

The mineral resource estimate completed by Mercator is based on validated results of 231 diamond drill holes, including 51 surface diamond drill holes totaling 7,235 meters completed in 2012 by Minco, which combined with previous drilling by Buchans Minerals Corp, totals 24,519 meters of diamond drilling. Modeling was performed using Gemcom Surpac® 6.3.1 modeling software with zinc, lead, copper, silver, gold and barite grades estimated using inverse distance squared ("ID²") interpolation methodology from 1 meter down hole assay composites. The resource block model was set up as a partial percentage model with a block size of 5m (x) by 5m (y) by 5m (z).

Metal grade assignment was peripherally constrained by two separate wire-framed solid models based on sectional geological interpretations and a minimum included combined grade that reflects a $10 NSR value.

The Lundberg resource solid is the larger of the two adjacent zones, measures approximately 700 meters east-west and 400 meters north-south, and plunges from the bedrock-overburden interface in the southeast to a maximum depth of 350 meters below surface to the northwest.

The Engine House resource solid measures approximately 250 meters east-west and 175 meters north-south, and plunges from the bedrock overburden interface in the east to a maximum depth of 125 meters below surface in the west.

 Null values were assigned to all prior underground development and stoping areas from the historic mine through solid models created for the previous resource estimate. All resource blocks intersecting these prior mined solids were removed from the estimate.

Interpolation ellipsoid ranges and orientations were developed through assessment of variography combined with geological interpretations and mining history information. Major axis orientations conform to the down plunge directions for both the Lundberg and Engine House solids, these being 320° and 270° respectively, with plunges varying between 10° and 40° locally. The semi-major axes occur within stratigraphy and perpendicular to the major axes, while minor axes are oriented at a high angle to stratigraphy in the down-hole direction. Major, semi-major, and minor axis ranges of 75 meters, 50 meters, and 25 meters, respectively, were used for initial interpolation passes for all metals. A second interpolation pass at double these ranges was used to interpolate grades in all blocks not evaluated in the first pass. At least 3 and a maximum of 12 contributing assay composites, with no more than 4 composites allowed from a single drill hole, were required to interpolate a valid block grade.

Results from 4,458 separate laboratory determinations of specific gravity were used to develop an interpolated specific gravity model using ID2 methodology specified above.

Indicated resources are defined as all interpolated blocks with 9 or more contributing composites with a maximum average distance of 55 meters from the block centroid that are within a 50 meter range of a 2008 or 2012 drill holes.

Inferred resources are defined as all other interpolated blocks meeting the $15/tonne NSR cut off and occurring within the deposit peripheral constraints. No Measured resources were defined.

QUALIFIED PERSON & SAMPLING PROCEDURE

Peter C. Webster, P. Geo., of Mercator Geological Services Limited monitored the 2012 drilling program, and is responsible for the resource estimates presented in this news release. Mr. Webster is an independent third party geologist, President of Mercator Geological Services Limited, and a Qualified Person as defined under National Instrument 43-101 of the Canadian Securities Administrators. Historical information used in this resource estimation has been validated and all information obtained from drilling by Buchans Minerals has followed logging, sampling and assaying procedures as per the QA/QC protocol described in Minco's press release dated September 13th, 2012.

Paul Moore, M.Sc., P.Geo., (NL), Buchans Minerals Vice President of Exploration, a Qualified Person within the meaning of National Instrument 43-101 of the Canadian Securities Administrators, supervised the 2012 drill program.

Mr. Benjamin Batson, P. Geo., Vice President (Exploration - North America) of Centrerock Mining Limited (a wholly owned subsidiary of Minco plc), a Qualified Person within the meaning of National Instrument 43-101 of the Canadian Securities Administrators has reviewed the contents of this release for accuracy.

Mr. Terence N McKillen, B.A. (MOD), M.A., M.Sc., P.Geo, Chief Executive Officer, is Minco's Competent Person for the purposes of the AIM Guidance Note on Mining, Oil and Gas Companies dated March 2006. Mr. McKillen is a graduate in Natural Sciences (Geology) from Trinity College Dublin and holds a Master of Science degree in Mineral Exploration and Mining Geology from the University of Leicester. He has over 40 years of exploration experience in Ireland and internationally.

MINCO BUCHANS JOINT VENTURE AGREEMENT

On April 30th, 2012, Buchans Minerals Corporation and Minco announced an agreement granting Minco the right to earn a 51% interest in Buchans base metal properties in central Newfoundland by spending CDN$8 million to advance the Lundberg deposit to final feasibility over four (4) years and further explore the extensive mineral properties in the region held by Buchans Minerals.

Minco is initially required to spend CDN$3.5 million over the first two years to advance the project to the pre-feasibility stage. Following the completion of the new resource estimate Minco now plans to undertake a range of ongoing development activities that will include geotechnical engineering, open-pit mine plan, metallurgy, plant design, engineering, environmental studies and an economic evaluation.

Following the expenditure of CDN$3.5 million and the completion of a Pre-Feasibility Study, Minco will have the option to proceed to complete a final feasibility study by spending a further CDN$4.5 million over the following two years and thereby earn a 51% interest in the project.

ABOUT MINCO

Minco Plc, registered in the Republic of Ireland and listed on the AIM Alternative Investment Market of the London Stock Exchange ("MIO"), is an exploration and development company, currently engaged in zinc-lead exploration in Canada, the United Kingdom and Ireland and in evaluating a manganese project in New Brunswick, Canada, also in joint venture with Buchans Minerals Corp, and with investments in zinc‐silver projects in Mexico through a holding of 30 million shares (approximately 29%) in Xtierra Inc. listed on the TSX Venture Exchange (TSX.V-"XAG").

Minco holds 15.4 million shares (approximately 10%) in Buchans Minerals Corporation also listed on the TSX.V ("BMC").

Minco also holds a 2% NSR royalty on the Curraghinalt gold property in Northern Ireland which is being explored by Dalradian Resources Inc. (TSX-"DNA").

For further information of Minco refer to Minco's website at www.minco.ie.

For further information, www.minco.ie or contact:

John Kearney: Executive Chairman +1 416 362 6686

Terence McKillen: Chief Executive +1 416 362 8243

Danesh Varma: CFO & Company Secretary +44 (0) 8452 606 034

Peter McParland: Director - Ireland +353 (0)46 907-3709

John Frain/Fergal Meegan: (NOMAD) Davy +353 (0)1 6796363

Chris Rourke/ Guy Wheatley: (Corporate Advisor| Broker)

Beaufort International, London +44 (0)20 7382 8387