Roundtable Discussion; The Future of Mineral Sands. Watch the video here.
London South East prides itself on its community spirit, and in order to keep the chat section problem free, we ask all members to follow these simple rules. In these rules, we refer to ourselves as "we", "us", "our". The user of the website is referred to as "you" and "your".
By posting on our share chat boards you are agreeing to the following:
The IP address of all posts is recorded to aid in enforcing these conditions. As a user you agree to any information you have entered being stored in a database. You agree that we have the right to remove, edit, move or close any topic or board at any time should we see fit. You agree that we have the right to remove any post without notice. You agree that we have the right to suspend your account without notice.
Please note some users may not behave properly and may post content that is misleading, untrue or offensive.
It is not possible for us to fully monitor all content all of the time but where we have actually received notice of any content that is potentially misleading, untrue, offensive, unlawful, infringes third party rights or is potentially in breach of these terms and conditions, then we will review such content, decide whether to remove it from this website and act accordingly.
Premium Members are members that have a premium subscription with London South East. You can subscribe here.
London South East does not endorse such members, and posts should not be construed as advice and represent the opinions of the authors, not those of London South East Ltd, or its affiliates.
lol had a look at the posts thats filtered for a laught....oldblue....oldblue please talk to me oldblue and justify my existance lol
Yes Oldblue, been busy bashing the unsubstantiated, substandard, subnormal rubbish you churn out.
morning everyone wow so so so many filtered posts see team bash have been busy
Phimx - oldblue1973 must only see about 10% chats most of us are filtered.
Back to INSP
No Boiler
No Charger - 3D model
No Contracts - except express a interest
No Employees - Expect Directors and more directors
Not made a single turnover since company's accounts - except fund raises & Warrants
No fellow collaboration with high profile shareholders
You could not make this up
So much for an exciting GM. Back to reality !
Oldblue: In reply to your message below
"maidit308 flow boiler wasnt stirling it was a rankine cycle much different and only produced MAX 1kw output garbage really mr buffalo 2014 rns hay a unit in field trials (wow they must off made one)
https://www.lse.co.uk/rns/INSP/barchester-healthcare-trials-vcjt39xrw1tpmij.html
and before you say anything il imagine it didnt go well which is why it when back into r and d
Can you produce ANY EVIDENCE WHATSOEVER that this trial was EVER carried out ? As you say if, by a thousand to 1 chance, it did then why wasn't it reported.
You also suggest Inspirit made a Charger of some form but at this date they only had the device built by Disenco. Try and stretch your memory, Inspirit were simply turning the Disenco device into a commercial product i.e. they were not starting from scratch. So far they have failed to do that - 10 long years later. They couldn't handle the job plain and simple and underestimated the costs and effort required to do so -assuming the thing they bought from Disenco actually did what they said.
I have lots of evidence of failed achievements, partnerships, discussions, trials and lack staff and of course a total lack of a product to go on the shelves- all written by Inspirit themselves. You on the other hand have not one shred of evidence for your arguments for this company. The simple fact that Inspirit could not demonstrate a working device to Volvo, after 10 years, speaks for itself !
Oldblue: The phrase you highlight i.e. “ … the testing of our microCHP boiler technology again.”
Now that phrase is worth further consideration. My first thought is, what it doesn’t say! It does not say “testing our Charger” nor “testing our verification product/Charger/boiler” nor “testing our latest Charger build” nor “testing our final preproduction build” nor “our latest working model” Quite simply, it doesn’t allude to any finished or close to complete product.
It states “microCHP boiler technology”. My next thought is, does it refer to the boiler element alone i.e. that major part of the final product. Is it referring to the gas burning element ?
Third thought – it could be read with emphasis on the word “technology”. Now that could mean anything, the vibration mounts, the user control display ( note this doesn’t appear anywhere - photos, videos, website another slight oversight !) Does it mean they are testing the circulation pump, the heat exchangers, temperature sensors and so on. So the word “technology” could mean absolutely anything was being tested including testing the strength of the bolts holding the thing together.
You all too easily read into words and statements interpretations that fit your ambitions, hopes and dreams for your shares and wealth. Since I don’t have any emotional attachment to this share, I try to interpret what is there not what I want to be there.
Another point, why did Inspirit not invite Volvo man to their multi-million pound manufacturing and testing facility in Poland to view the wonder device working at full tilt. Would have made a better impression surely.
Far more impressive than the hand cranked model !
What point are you trying to make? Of course it's for the Charger. Have you forgotten for the last year you have been spouting about the Charger - after all it's the only piece of technology Inspirit have under development. The charger is fundamental to the marine/Volvo project i.e. as stated by Inspirit ------- 50%
As usual you reply to something that hasn't been asked or isn't being discussed are you really this clueless ??
And from where does "Volvo the engineering partner" suddenly come from ??? again you dream up relationships that do not exist or have not been announced. Make it up as you go along son, I'll stick to the reality
look it very difficult to have a meaniuful discussion with someone who is only here to bash the share
you stated the following
From RNS 13 Nov 2019: In 2020 we expect to produce our first unit with the assistance of our engineering partner in Poland. The success of the unit will allow us to have a unit ready for batch production.
THERE HAS BEEN NO ANNOUNCEMENT ---- INDISPUTABLE FACT -> FACT --> FACT --->FACT ---->FACT -----> FACT ------> FACT
THERFORE IT DOES NOT EXIST IN PHYSICAL FORM. PERHAPS THATS WHY THEY COULD ONLY DEMONSTRATED A MODEL - MODEL - MODEL - MODEL - MODEL -MODEL - MODEL - MODEL - MODEL - MODEL - MODEL - MODEL - MODEL -MODEL - MODEL TO VOLVO
first off all the refernece you make is to the charger and nothing to do with volvo the engineering partner in poland is for the boiler vovlo penta are in sweden (marine)
https://www.lse.co.uk/rns/INSP/operations-update-7drx0cfm7pqkvcs.html
SIX MONTHS AGO(charger/boiler/mchp)
As previously announced, during these unprecedented times and given the actions that Global Governments took to control COVID-19, our European partners assisting with our Inspirit charger went into lockdown and temporarily diversified their manufacturing into producing Personal Protection Equipment (PPE) due to the high demand over Europe and the World. We have been advised that as the demand decreases for medical supplies and their supply chain for materials recover availability, they will be returning to their normal engineering manufacturing sector and will therefore be able to assist with the testing of our microCHP boiler technology again. The board will provide further updates on timing in due course.
if there no producded unit what the heck are they going to test in poland? lies lies lies
so with that ill put you back on filter
and the daft thing is if CH had come on baord as per velvo penta (1 year ago as well) he could be at the same stage as them but as JG stated CH only wanted to start developing the tech after sept 2021 and remeber hes doing his own aim company (the turbines) soon so did he want to list company get funds then come back to inspirit for the tech later? as he know he has to boost the efficency off the linear turbines (far cheaper but less efficent than ndpr) but with all the legal wranglings between them ild imagine there now bad blood there between them all imho dyor etc etc
ohh and were not saying rns next week could be anytime as with any aim share the rns is coming when the rns is coming not before
maidit308 flow boiler wasnt stirling it was a rankine cycle much different and only produced MAX 1kw output garbage really
mr buffalo 2014 rns hay a unit in field trials (wow they must off made one)
https://www.lse.co.uk/rns/INSP/barchester-healthcare-trials-vcjt39xrw1tpmij.html
and before you say anything il imagine it didnt go well which is why it when back into r and d
yes , and I do hope CH continue to hold and buy some more at these levels
and don't just give up and go else where for another Stirling engine TECH
as i can tell him that many CO have tried lots of other Stirling rote and failed, IE: FLOW and many more
J/G knows he is the only one that have cracked it, and has improve on it 100 times over
in the last few years, and he would be wasting his time and money
IMO keep talking and don't try and bully
308