London South East prides itself on its community spirit, and in order to keep the chat section problem free, we ask all members to follow these simple rules. In these rules, we refer to ourselves as "we", "us", "our". The user of the website is referred to as "you" and "your".
By posting on our share chat boards you are agreeing to the following:
The IP address of all posts is recorded to aid in enforcing these conditions. As a user you agree to any information you have entered being stored in a database. You agree that we have the right to remove, edit, move or close any topic or board at any time should we see fit. You agree that we have the right to remove any post without notice. You agree that we have the right to suspend your account without notice.
Please note some users may not behave properly and may post content that is misleading, untrue or offensive.
It is not possible for us to fully monitor all content all of the time but where we have actually received notice of any content that is potentially misleading, untrue, offensive, unlawful, infringes third party rights or is potentially in breach of these terms and conditions, then we will review such content, decide whether to remove it from this website and act accordingly.
Premium Members are members that have a premium subscription with London South East. You can subscribe here.
London South East does not endorse such members, and posts should not be construed as advice and represent the opinions of the authors, not those of London South East Ltd, or its affiliates.
Now with the diamond drilling nearing it's end, giving the team good core samples to test, do we see them continuing with the diamond drilling process or reverting back to the RC method, being the cheaper option. Diamond drilling is expensive to run with continual maintenence costs and parts expensive and delays potentially as the shipping chaos commences along certain areas.
Australia have some of the best diamond drilling facilitators around, but would still source parts foreign.
I'd prefer the RC drilling, 25% to 40% cheaper to run, and less time consuming.
Just a thought as I'm drilling titanium now, it's no easy task
Https://www.proactiveinvestors.co.uk/companies/news/1045578/empire-metals-completes-third-rc-drilling-round-at-pitfield-1045578.html
Obviously I'm aware we are doing both, and have been within budget. I just wondered if this will continue to be in budget throughout, the diamond drilling being of necessary importance to require samples being dropped and moving to a strictly RC process alone.
Or is the results going to be that good, we don't need to be concerned with funding or budgets
Im not being rude but you talk so much waffle and troff, keep the drilling to the experts, As SB said he's in budget for all RC and diamond drilling. He uses Strike drilling for all his drilling, they are quick and don't mess up any holes, you go for a cheaper driller with low end rigs and drills it's going to be more costly longterm. These buys drill to ISO standards and if the goverment are part funding SB is not going to cut corners. So less of the waffle and keep to the facts, you spam this board with no words of wisdom.
Look at this website and use your time correctly and research the boys who do the drilling!
https://www.strikedrilling.com.au/
ISO standards hahaha talk about just plucking stuff off the Internet, everything i do and work with is within ISO 9001 standards. T
Seriously I am ISO9001 so lets not go there, keep to News and stop questioning stuff you have no clue about. Let the experts at EEE worry about that not you and the negativity you spread here. You really are boring!!
I mean it's took you a while to rack all that info up that we knew in 5 minutes, it's bloody mining exploration dude, you could be finding Jesus mothers coffin down there, it's still going to cost, funding, grants, tax relief among many other things, so ye, the drilling frigging counts as the most costs, so the questions was adequate, your response, pathetic
Seriously done engaging with you now, you miss the point of this being a chat room for investors not professional mining drillers or geologists, so we ask questions! Go figure!
Your problem is your ego tells you your smarter, harder and just all round better so ye come on these forums to throw your weight around. As I said much time ago, lot of egos, but for reasons unknown. I'd pretty much guarantee, you don't equate to me in any given metric that counts, but you can talk the shiiite out of a bull
And to your, i don't want to sound rude opener.
Well you did
You do it a lot
So we have problems
Crazy part is I've not had the chance to engage in many conversations on here since I come on, because that negativity you just brought comes daily, from an early stage. SB mentions the sentence all in budget for a reason referring to drilling as its going to one of the larger costs, so as they scale costs will rise, at current it's at exploration and finding level so my question is not out of sorts. The company on your link I haven't fully looked into, but I will now you brought it to the table, so glad you brought something than just aggressive undertones. But it said mobile drilling, will that be the main equipment once they scale? Is it now full RC? These are important details, I'm assuming I'm OK to ask.
FYI I bought more shares yesterday a little higher, so my post has zero agenda
Dusty, for gods sake mate, you are averaging over 10 posts a day on this thread, in the last 30 days.
Why don't you take a step back and read instead of typing endlessly?
Seriously mate, you are never ending!.
Just go quiet for a month or 2, watch the share price rise.
What are you gaining from this constant posting?
Talking about your sons, your wife et al, this is not a therapy session.
You are supposed to be on holiday, have a beer, relax, chat with your feisty wife.
Seriously mate, this is like some American group therapy session.
A genuine investor would read the RNSs and see that all the drilling for 2024 has already been laid out. That includes how many meters of Diamond and how many meters of RC.
Also if anybody started a post with "now the diamond drilling is nearing its end", even though today's RNS clearly states the diamond drilling was completed before the end of March, should tell you they aren't here on the level.....the mask slips yet again it seems.
Now I wonder what reply awaits, cause why write one when five will suffice 🤡🤣
👌I think you just hit the nail on the head.
Adios
GLA
It doesn't matter mischief don't worry about it
Its a technicality, nearing the end, at the end.
See you in June
We know you will back in 10 minutes, my god I can’t believe you are married. You must drive your Mrs and kids mad, since you have been here you have added 20-30 posts a day on this forum. It’s not a bad thing you keep it active, but seriously if you’re in Spain you can score some good Moroccan hash. Get yourself chilled, Get a good Spanish beer down you in a nice beach bar and take in the view.
What is going on on this board…
People talking a load of trot…. And tit boy wanting to fight them … quality bb
He comes from Ireland… I think he was an unsuccessful jockey
Looking good with time after the HEAD & SHOULDER being formed
https://uk.advfn.com/p.php?pid=chartscreenshot&u=W6FNqfsSvKtbMxR5IPQCo5%20Vpi3Sf2zvGVRK3vLe98Q=
A very good start of the day with 8.15p +0.45p, and there is volume to go with the rise.
Does the daily have to close around 8.50 to be complete, or is this considered as formed? I know very little about charts.
Jwoz.....I have used the filter function to reduce BB "noise and abuse" to an empty green box.
And by the same measure others can do the same to me.
Just discovered the filter myself. Surprising how much "noise" you can remove by simply adding a single name to the list !
Top of the morning to you, put the farm on Wee Charlie, 6:20 Limerick!!
Its a nap from me the cage fighter from County Cork!!