Member Info for FillToSpill

Well I'm certain I'll be here for at least another 10 months, the value needs to be revealed and it will take a while.

The proximity to telfer mine is only 15 km and its 65km to Haverion.. Its also only 50Km to Nifty Mine to North West.

We have 257m of mineralised intercept on the first hole which correlates with the Geophysics and perhaps a larger intercept if they have now continued further 300m from 777m. We expect Hole 2 to be underway as we speak. The intercept depth is also very similar to the Haverion discovery.

No Assay results yet but for me its worth the risk waiting to find out due to the above.

I'm not saying I can afford to loose the money invested. Albeit I don't expect to, more to the point, based on information to date I'm willing to take the risk.

I am waiting for the value to be realised and will be invested (hopefully) until a £250-750 mill market cap.

This and the pr

I think, if they have cased Hole 2 to 150m but then went back to Hole 1, this is a very positive sign. It means it was worth waiting for the extra rods and punching beyond 777m. They wouldn't do that if mineralisation wasn't strong to end of hole at 777m.

For all we know Hole 1 might have mineralisation all the way to 1000m+ from 520m.. Which would be mega..

Lets have everything crossed hole 1 comes up with at least 1.5g/t over 150m+ with some copper at circa 0.9%.

That or similar is what we are looking for.

The 'market could be surprised' and we might get a big intercept of 2.5g/t gold and copper. With some very high sections of bonanza grade.. That would really be lift off.

So they must be going deeper with hole 1

However looking back,all it says is bigger drill rods on show amd you can see them in foreground, doesnt say rig moved or anything :-)

This is the X post by Wishbone regards drilling step out with RC rig..

https://x.com/WishboneGoldPlc/status/1959496344319496523?s=19

If they need to wait for rods, might as well finish hole 1 if mineralisation is continuing to bottom of the hole.. This will save having to move the water tanks, and all other associated equipment back to hole 1 later.

Also if the hole is left then some cleaning out would be required on return.

Makes sense to finish Hole 1 if there is something to be looked at beyond 777m.

As per Wishbone latest tweet they appear to be drilling CORE again at Hole 1 as this is what's stated within the image.

2nd hole could be a 9x40m = 360m + the 150m RC which might have only taken a day or two.. Therefore could be hitting some interesting Breccia right about now..

Which broker is minimum 8p?? Thanks.

My prediction for next RNS in a day or two.. Nothing too exciting at this stage..

Drilling update, RC drill has drilled to 150m and hole has been cased. The diamond drill is currently drilling deeper on a double shift basis and is circa 250m deep (obv. a guess at this stage).

Meanwhile the assay results are with the Perth lab and results are expected within two to three weeks.

THEN next week hopefully they hit 450-500m and update noting they have successfully intersected the Breccia pipe and there is further mineralisation, drilling on to around 1000m deep.

Following week after that ASSAYS for Hole 1.

LOTM, I dont know how you managed ti get CHAT Gpt To give you grades from core photo.. I tried and got this answer..

If you uploaded a drill core photo and asked me (ChatGPT-5) “What’s the grade here?” I would not give you a number like 2.5% Cu or 4 g/t Au, because that would be misleading. I’d tell you that grades cannot be determined from photos and explain why.

What I can do is:

Describe visible mineralogy (e.g., “there appears to be disseminated chalcopyrite and pyrite, maybe 2–3% sulfides visually”).

Comment on textures, veining, and alteration that suggest potential mineralization.

Help estimate relative intensity of visible features (low / moderate / high sulfide content).

But I will not generate assay values (Cu %, Au g/t, etc.) from photos, because those require lab testing.

So if someone shows you an “AI output” with actual grades from a core photo, that isn’t ChatGPT working

As there is copper present its worth lookong at thr value of any copper found..

Gold (2 g/t) at ~$110/g ≈ $220 per tonne of ore.

Copper at ~$9,700/tonne => 1 % Cu ≈ $97 per tonne of ore.

Thus, 2.3 % Cu (≈ $223/t) ≈ 2 g/t Au (≈ $220/t).

So roughly every 1.25% copper is worth 1g/t AU..

There is a green haze to a lot of the drill core photos therefore the copper content could be high grade 2-3% over decent intercepts with gold and/or other metal bonuses.

It looks like a crescent shape in those Geophysics' survey images similar to Haverion.

Every time I look at this it just makes me very excited for hole 02. Hole 1 has large intercepts through the east to west cross section but hole 2 going into the lateral extent.. North to south (not truly aligned) you can see its very long compared to the 200m+ wide intersect on hole 1. Therefore hole 2 intersect potentially going to be huge..

They have decided to spend a bit extra on hole 2 and drill from surfave rather than the pre-drilldd hole from 250m..

Because they hot a breccia pipe. The drill cores will tell them direction of pipe therefore they can calculate where to fond the centre..

Why would they wantt o find centre? Well its because the breccia pipe holds all the mineralistion.. You can see copper in drill cores and they will know if gold in cores by now too, as they will have eye glassss on site..

So they have found it and chasing it..

Volume is 323mill so far..

II also now have WSBN Morningstar fair value at 2.39p and apparently we are sitting at a 39% discount :-)

How do you know?

I think most (including myself) expect even bigger intercepts on the second hole.

This is because the Geophysics data indicates a kind of triangular shape to the anomaly. We have just drilled east to west to locate the pipe and cut through the cross section therefore in and out the other end akka 152m thick. Looking at the geophysics the length of this is circa 1km and depth just keeps going.

So when hole 2 drills down the centre of the pipe, the Breccia will just keep going, possibly from 450m to 1000m +

All speculation based on current info but i also believe hole 2 will have even larger intercepts 100's of metres.

The first paragraph to last RNS..

Wishbone Gold Plc is pleased to announce that drilling at the Company's Red Setter Gold Dome Project, located 15km South-West of Greatland Gold Plc's (AIM and ASX: GGP) Telfer gold mine in Western Australia (Figure 1), has drilled the breccia identified in hole number 25RSDD001 down to a depth of 777m (Figures 2-3), an interval of 152m, with Quartz-carbonate veining and sulphides of chalcopyrite and pyrite on either side from 520m-777m a total zone of 257m.

So my understanding 152m of Breccia (which will likely translate to an intercept). Either side circa 50m of quartz veining and sulphides so also a high chance of something at both sides of the Breccia cross section.

From Geophysics the length of the Breccia looks circa 1km and depth to beyond 1000m+ from at least 522m but potentially shallower at centre of dome/Breccia.

Therefore if this Breccia proves to contain a decent grade of anything then we are onto a big winner.. Chalcopyrite and weathered copper already visible in the drill cores.