George Frangeskides, Exec-Chair at Alba Mineral Resources, discusses grades at the Clogau Gold Mine. Watch the full video here.

Less Ads, More Data, More Tools Register for FREE

Pin to quick picksSolGold Regulatory News (SOLG)

Share Price Information for SolGold (SOLG)

London Stock Exchange
Share Price is delayed by 15 minutes
Get Live Data
Share Price: 10.60
Bid: 10.28
Ask: 10.40
Change: 1.31 (14.10%)
Spread: 0.12 (1.167%)
Open: 9.41
High: 10.60
Low: 9.29
Prev. Close: 9.29
SOLG Live PriceLast checked at -

Watchlists are a member only feature

Login to your account

Alerts are a premium feature

Login to your account

Cascabel Exploration Update

24 May 2021 07:00

RNS Number : 5559Z
SolGold PLC
24 May 2021
 

24 May 2021

SolGold plc

("SolGold" or the "Company")

 

Drilling Results from Holes 1-7 at Tandayama-America Porphyry Copper-Gold Target, Cascabel, indicative of significant resource potential 

 

The Board of SolGold (LSE & TSX: SOLG) is pleased to provide an update on its Tandayama-America ("TAM") Porphyry Copper-Gold target which lies approximately 3km north of the Alpala Deposit that comprises 2,663 Mt at 0.53% CuEq in the Measured plus Indicated categories and contained metal content of 9.9 Mt Cu, 21.7 Moz Au and 92.2 Moz Ag [1], at the Company's Cascabel Project, held by Exploraciones Novomining S.A ("ENSA"), an 85% owned subsidiary of SolGold.

Highlights

 

Ø Drilling results from the Tandayama-America Porphyry Copper-Gold target at Cascabel has intersected significant copper and gold mineralisation, including numerous intercepts of over 100m% Copper Equivalent (CuEq) [2] [3].

 

Ø Selected highlights of drill hole assays received from Holes 1 to 7 include:

Hole 1: 531m @ 0.30% CuEq, including 272m @ 0.44% CuEq

Hole 3: 1,040m @ 0.33% CuEq, including 350m @ 0.45% CuEq

Hole 5: 426m @ 0.37% CuEq, including 342m @ 0.43% CuEq

Hole 7: 522m @ 0.38% CuEq, including 230m @ 0.44% CuEq

 

Ø Assay results from drill holes 8-10 are pending and drilling of Holes 9 and 10 is currently underway.

 

Ø Mineralisation at TAM forms a northwest trending corridor, occupying an area 750m long by 500m wide, and extending from surface to a depth of over 1,200m. Further drilling aims at defining the extent of mineralisation towards the northwest, the southeast and at depth where the deposit remains open.

 

Ø Due to the significance of results achieved thus far at TAM, additional diamond drill rigs are to be mobilised to expedite drilling.

 

Ø An NI 43-101 compliant Maiden Mineral Resource Estimate is planned for later in 2021.

 

SolGold Executive Board Member and ENSA President, Mr Jason Ward, commented on the work being advanced at Cascabel:

"Significant copper and gold mineralisation at the TAM target will add to the already impressive metal inventory at Alpala. The recent drilling results at TAM are indicative of a significant prospective resource that appears amenable to bulk surface mining methods. This seems likely to have a major beneficial impact on the development of the Cascabel property as a whole and the further upside of a potentially significant deep target beneath TAM is certainly adding excitement to the growing possibilities at Cascabel."

 

[1] See "Cascabel Property NI 43-101 Technical Report, Alpala Porphyry Copper-Gold-Silver Deposit - Mineral Resource Estimation, January 2021" with an Effective date: 18 March 2020 and Amended Date: 15 January 2021 (the "Amended Technical Report"), filed at www.Sedar.com on January 29, 2021.

[2] Copper Equivalent (CuEq) is currently calculated (assuming 100% recovery of copper and gold) using a Gold Conversion Factor of 0.751 (CuEq = Cu + Au x 0.751), calculated from a current nominal copper price of US$3.30/lb and a gold price of US$1,700/oz.

[3] Metre percent Copper Equivalent (m% CuEq) = interval length (m) x grade of the entire interval (CuEq%). M% CuEq calculation provides a standardised measure of comparing drilling intercepts by calculating an analogous interval length that would hold a CuEq% grade of 1% for each metre within the selected interval.

References to figures relate to the version visible in PDF format by clicking the link below:

http://www.rns-pdf.londonstockexchange.com/rns/5559Z_1-2021-5-24.pdf 

 

Further Information

The TAM target lies approximately 3km north of the Alpala Deposit, located on the Cascabel property within the Imbabura province of northern Ecuador. The project area lies approximately 100km north of the capital city of Quito and approximately 50km north-northwest of the provincial capital, Ibarra (Figure 1).

 

Drilling from the TAM Copper-Gold target at Cascabel has intersected significant copper and gold mineralisation. Final assay results from drill holes 1-7 returned numerous intercepts of over 100m% CuEq (Table 1).

 

Selected highlights of drill hole assays received from Holes 1 to 7 include:

Hole 1: 531m @ 0.30% CuEq, including 272m @ 0.44% CuEq

Hole 2: 487m @ 0.20% CuEq

Hole 3: 1,040m @ 0.33% CuEq, including 350m @ 0.45% CuEq

Hole 4: 364m @ 0.28% CuEq, including 312m @ 0.30% CuEq

Hole 5: 426m @ 0.37% CuEq, including 342m @ 0.43% CuEq

Hole 6: 358m @ 0.29% CuEq, including 160m @ 0.49% CuEq

Hole 7: 522m @ 0.38% CuEq, including 230m @ 0.44% CuEq

 

Selected examples of mineralisation encountered at TAM to date are provided in Figure 2.

 

Assay results from drill holes 8-10 are pending and drilling of Holes 9 and 10 is currently underway.

 

Drilling at TAM continues with three diamond drill rigs and further expansion of the TAM drilling fleet is planned (Figure 3). Cross sections through the centre of the target are provided in Figure 4.

 

The intersection of noteworthy porphyry stockwork mineralisation encountered in Hole 9 in the deeper portions of the drilling area contained high abundance of B-type quartz-chalcopyrite veining (Figure 5). This intense mineralisation hosted within a pre-mineral intrusive breccia host rock, suggests that a fluid-rich source intrusion may be intersected through further drilling at depth, and highlights the potential for a deeper bulk underground target that may lie beneath the current drilling area. Further drilling is planned to test for the potential of a deep-rooted porphyry system.

 

Mineralisation at TAM forms a northwest trending corridor, occupying and area 750m long x 500m wide extending from surface to a depth of over 1,200m. The TAM target lies open is several directions:

1. to the northwest and shallow

2. to the southeast from surface to unknown depth, and

3. at depth below the area of current drill testing

 

 

The 2021 proposed drilling program focusses on three main factors:

· drilling to define the northwest and southeast limits of mineralisation amenable to bulk surface mining methods, and

· drilling to define the depth extent and character of mineralisation with potential amenability to bulk underground mining methods,

· infill drilling to increase drill density and geological confidence.

 

 

An NI43-101 compliant Maiden Mineral Resource Estimate is planned for the TAM target later in 2021.

 

 

 

Hole ID

From m

To m

Interval m

Cu %

Au g/t

Cu.Eq %

Cut-off (CuEq%)

m% (CuEq)

Comments

TAD-20-001

220

751

531

0.20

0.13

0.30

0.10

159.4

Open at Depth

330

624

294

0.28

0.19

0.42

0.20

123.5

 

350

622

272

0.29

0.19

0.44

na

119.7

 

TAD-20-002

21

100

79

0.11

0.15

0.22

0.10

17.4

 

202

690

488

0.12

0.10

0.20

0.10

97.6

Open at Depth

TAD-20-003

252

1,292

1,040

0.24

0.11

0.33

0.10

343.3

 

502

1,214

712

0.28

0.13

0.37

0.20

263.4

 

632

982

350

0.34

0.15

0.45

0.30

157.5

 

TAD-20-004

690

1,054

364

0.21

0.08

0.28

0.10

101.9

 

742

1,054

312

0.23

0.09

0.30

0.20

93.6

 

TAD-20-005

218

644

426

0.25

0.16

0.37

0.10

157.6

 

230

572

342

0.29

0.19

0.43

0.30

147.1

 

328

566

238

0.31

0.17

0.44

0.40

104.7

 

TAD-20-006

76

434

358

0.19

0.13

0.29

0.10

103.8

 

200

360

160

0.32

0.22

0.49

0.20

78.4

 

232

352

120

0.36

0.27

0.56

0.40

67.2

 

TAD-20-007

230

752

522

0.26

0.16

0.38

0.10

198.4

 

276

506

230

0.28

0.22

0.44

0.30

101.2

 

524

722

198

0.29

0.14

0.40

0.30

79.2

 

Notes:

1. Significant down-hole drill intercepts are reported using a data aggregation method based on copper equivalent (CuEq) cut-off grades with up to 10m internal dilution, excluding bridging to a single sample and with minimum intersection length of 50m. 

2. True width of down-hole intersections reported are expected to be approximately 35-95% of the down-hole lengths, depending on the attitude of the drill hole.

3. Copper Equivalent is currently calculated (assuming 100% recovery of copper and gold) using a Gold Conversion Factor of 0.751 (CuEq = Cu + Au x 0.751), calculated from a current nominal copper price of US$3.30/lb and a gold price of US$1,700/oz. 

4. Metre percent Copper Equivalent (m% CuEq) = interval length (m) x grade of the entire interval (CuEq%). M% CuEq calculation provides a standardised measure of comparing drilling intercepts by calculating an analogous interval length that would hold a CuEq% grade of 1% for each metre within the selected interval.

Table 1: Selected significant intercepts achieved at the TAM target to date. 

 

Figure 1Location of TAM, Alpala and Aguinaga at the Cascabel project.

 

Figure 2: Selected drill core examples of strong visible chalcopyrite copper sulphide mineralisation within a quartz-diorite intrusion in TAD-20-001. Drill core is HQ size or 63.5mm in diameter. 

Figure 3: Drill Plan at the TAM target, looking down, showing current and planned drilling over soil molybdenum geochemistry anomalism. Drilling at TAM continues with three diamond drill rigs and further expansion of the TAM drilling fleet is planned. Section lines A-A' and B-B' correspond with Sections A-A' and B'B' provided below in Figure 4. 

Figure 4: Drill Sections A-A' and B-B', looking northwest, with a window thickness of 150m, showing modelled grade shells at the TAM target where Low-, Medium- and High-Grade shells are modelled utilising CuEq cut-off grades of 0.1%, 0.2% and 0.4% respectively.

 

Figure 5: Drill core examples of intense porphyry stockwork mineralisation containing a high abundance of B-type quartz-chalcopyrite veining, hosted within a pre-mineral intrusive breccia host rock in Hole 9 at the TAM target. These rock types are characteristic of host rocks proximal to a fluid-rich source intrusion. Drill core is HQ size or 63.5mm in diameter. 

 

Market Abuse Regulation (MAR) Disclosure

 

Certain information contained in this announcement would have been deemed inside information for the purposes of Article 7 of the Regulation (EU) No 596/2014 until the release of this announcement.

 

Qualified Person:

 

Information in this report relating to the exploration results is based on data reviewed by Mr Jason Ward ((CP) B.Sc. Geol.), the Chief Geologist of the Company. Mr Ward is a Fellow of the Australasian Institute of Mining and Metallurgy, holds the designation FAusIMM (CP), and has in excess of 20 years' experience in mineral exploration and is a Qualified Person for the purposes of the relevant LSE and TSX Rules. Mr Ward consents to the inclusion of the information in the form and context in which it appears.

 

 

By order of the Board

Karl Schlobohm

Company Secretary

 

CONTACTS

 

Karl Schlobohm

SolGold Plc (Company Secretary)

kschlobohm@solgold.com.au

 

 

Tel: +61 (0) 7 3303 0661

Ingo Hofmaier

SolGold Plc (GM - Project & Corporate Finance) ihofmaier@solgold.com.au

 

 

Tel: +44 (0) 20 3823 2131

Fawzi Hanano

SolGold Plc (Investors / Media)

fhanano@solgold.com.au

 

 

Tel: +44 (0) 20 3823 2131

Follow us on twitter @SolGold_plc

 

ABOUT SOLGOLD

SolGold is a leading resources company focussed on the discovery, definition and development of world-class copper and gold deposits. In 2018, SolGold's management team was recognised by the "Mines and Money" Forum as an example of excellence in the industry and continues to strive to deliver objectives efficiently and in the interests of shareholders. SolGold, with 76 concessions covering approximately 3,100km², is the largest and most active concession holder in Ecuador and is aggressively exploring the length and breadth of this highly prospective and gold-rich section of the Andean Copper Belt which is currently responsible for c40% of global mined copper production.

 

The Company operates with transparency and in accordance with international best practices. SolGold is committed to delivering value to its shareholders, while simultaneously providing economic and social benefits to impacted communities, fostering a healthy and safe workplace and minimizing the environmental impact.

 

Dedicated stakeholders

SolGold employs a staff of over 800 employees of whom 98% are Ecuadorean. This is expected to grow as the operations expand at Alpala, and in Ecuador generally. SolGold focusses its operations to be safe, reliable and environmentally responsible and maintains close relationships with its local communities. SolGold has engaged an increasingly skilled, refined and experienced team of geoscientists using state of the art geophysical and geochemical modelling applied to an extensive database to enable the delivery of ore grade intersections from nearly every drill hole at Alpala. SolGold has over 80 geologists on the ground in Ecuador exploring for economic copper and gold deposits.

 

About Cascabel and Alpala

The Alpala deposit is the main target in the Cascabel concession, located on the northern section of the heavily endowed Andean Copper Belt, the entirety of which is renowned as the base for nearly half of the world's copper production. The project area hosts mineralisation of Eocene age, the same age as numerous Tier 1 deposits along the Andean Copper Belt in Chile and Peru to the south. The project base is located at Rocafuerte within the Cascabel concession in northern Ecuador, an approximately three-hour drive on sealed highway north of the capital Quito, close to water, power supply and Pacific ports.

 

Having fulfilled its earn-in requirements, SolGold is a registered shareholder with an unencumbered legal and beneficial 85% interest in ENSA (Exploraciones Novomining S.A.) which holds 100% of the Cascabel concession covering approximately 50km2. The junior equity owner in ENSA is required to repay 15% of costs since SolGold's earn in was completed, from 90% of its share of distribution of earnings or dividends from ENSA or the Cascabel concession. It is also required to contribute to development or be diluted, and if its interest falls below 10%, it shall reduce to a 0.5% NSR royalty which SolGold may acquire for US$3.5million.

 

SolGold's Regional Exploration Drive

SolGold is using its successful and cost-efficient blueprint established at Alpala, and Cascabel generally, to explore for additional world class copper and gold projects across Ecuador. SolGold is the largest and most active concessionaire in Ecuador.

 

The Company wholly owns four other subsidiaries active throughout the country that are now focussed on thirteen high priority gold and copper resource targets, several of which the Company believes have the potential, subject to resource definition and feasibility, to be developed in close succession or even on a more accelerated basis compared to Alpala.

 

SolGold is listed on the London Stock Exchange and Toronto Stock Exchange (LSE/TSX: SOLG). The Company has on issue a total of 2,292,316,432 fully paid ordinary shares and 108,375,000 share options.

 

Quality Assurance / Quality Control on Sample Collection, Security and Assaying

SolGold operates according to its rigorous Quality Assurance and Quality Control (QA/QC) protocol, which is consistent with industry best practices.

 

Primary sample collection involves secure transport from SolGold's concessions in Ecuador, to the ALS certified sample preparation facility in Quito, Ecuador. Samples are then air freighted from Quito to the ALS certified laboratory in Lima, Peru where the assaying of drill core, channel samples, rock chips and soil samples is undertaken. SolGold utilises ALS certified laboratories in Canada and Australia for the analysis of metallurgical samples.

 

Samples are prepared and analysed using 100g 4-Acid digest ICP with MS finish for 48 elements on a 0.25g aliquot (ME-MS61). Laboratory performance is routinely monitored using umpire assays, check batches and inter-laboratory comparisons between ALS certified laboratory in Lima and the ACME certified laboratory in Cuenca, Ecuador.

 

In order to monitor the ongoing quality of its analytical database, SolGold's QA/QC protocol encompasses standard sampling methodologies, including the insertion of certified powder blanks, coarse chip blanks, standards, pulp duplicates and field duplicates. The blanks and standards are Certified Reference Materials supplied by Ore Research and Exploration, Australia.

 

SolGold's QA/QC protocol also monitors the ongoing quality of its analytical database. The Company's protocol involves Independent data validation of the digital analytical database including search for sample overlaps, duplicate or absent samples as well as anomalous assay and survey results. These are routinely performed ahead of Mineral Resource Estimates and Feasibility Studies. No material QA/QC issues have been identified with respect to sample collection, security and assaying.

 

Reviews of the sample preparation, chain of custody, data security procedures and assaying methods used by SolGold confirm that they are consistent with industry best practices and all results stated in this announcement have passed SolGold's QA/QC protocol.

 

The data aggregation method for calculating Copper Equivalent (CuEq) for down-hole drilling intercepts and rock-saw channel sampling intervals are reported using copper equivalent (CuEq) cut-off grades with up to 10m internal dilution, excluding bridging to a single sample and with minimum intersection length of 50m.

 

Copper Equivalent is currently calculated (assuming 100% recovery of copper and gold) using a Gold Conversion Factor of 0.751 (CuEq = Cu + Au x 0.751), calculated from a current nominal copper price of US$3.30/lb and a gold price of US$1,700/oz.

 

 

See www.solgold.com.au for more information. Follow us on twitter @SolGold plc

 

CAUTIONARY NOTICE

 

News releases, presentations and public commentary made by SolGold plc (the "Company") and its Officers may contain certain statements and expressions of belief, expectation or opinion which are forward looking statements, and which relate, inter alia, to interpretations of exploration results to date and the Company's proposed strategy, plans and objectives or to the expectations or intentions of the Company's Directors, including the plan for developing the Project currently being studied as well as the expectations of the Company as to the forward price of copper. Such forward-looking and interpretative statements involve known and unknown risks, uncertainties and other important factors beyond the control of the Company that could cause the actual performance or achievements of the Company to be materially different from such interpretations and forward-looking statements.

 

Accordingly, the reader should not rely on any interpretations or forward-looking statements; and save as required by the exchange rules of the TSX and LSE or by applicable laws, the Company does not accept any obligation to disseminate any updates or revisions to such interpretations or forward-looking statements. The Company may reinterpret results to date as the status of its assets and projects changes with time expenditure, metals prices and other affecting circumstances.

 

This release may contain "forward‑looking information" within the meaning of applicable Canadian securities legislation. Forward‑looking information includes, but is not limited to, statements regarding the Company's plans for developing its properties. Generally, forward‑looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved".

 

Forward‑looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward‑looking information, including but not limited to: transaction risks; general business, economic, competitive, political and social uncertainties; future prices of mineral prices; accidents, labour disputes and shortages and other risks of the mining industry. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Factors that could cause actual results to differ materially from such forward-looking information include, but are not limited to, risks relating to the ability of exploration activities (including assay results) to accurately predict mineralization; errors in management's geological modelling and/or mine development plan; capital and operating costs varying significantly from estimates; the preliminary nature of visual assessments; delays in obtaining or failures to obtain required governmental, environmental or other required approvals; uncertainties relating to the availability and costs of financing needed in the future; changes in equity markets; inflation; the global economic climate; fluctuations in commodity prices; the ability of the Company to complete further exploration activities, including drilling; delays in the development of projects; environmental risks; community and non-governmental actions; other risks involved in the mineral exploration and development industry; the ability of the Company to retain its key management employees and skilled and experienced personnel; and those risks set out in the Company's public documents filed on SEDAR at www.sedar.com. Accordingly, readers should not place undue reliance on forward‑looking information. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws.

 

The Company and its officers do not endorse, or reject or otherwise comment on the conclusions, interpretations or views expressed in press articles or third-party analysis, and where possible aims to circulate all available material on its website.

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.RNS may use your IP address to confirm compliance with the terms and conditions, to analyse how you engage with the information contained in this communication, and to share such analysis on an anonymised basis with others as part of our commercial services. For further information about how RNS and the London Stock Exchange use the personal data you provide us, please see our Privacy Policy.
 
END
 
 
DRLPPURWAUPGUAC
Date   Source Headline
19th Mar 20247:00 amRNSBlanca-Nieves Project Update
12th Mar 20247:00 amRNSPre-Feasibility Study Technical Report
6th Mar 20247:00 amRNSCascabel CIPA
4th Mar 20247:00 amRNSMOU for Sustainable Hydro-Solar Energy at Cascabel
28th Feb 20247:00 amRNSSolGold Appoints New Directors
16th Feb 20247:00 amRNSCompletion of New Cascabel Pre-Feasibility Study
15th Feb 20247:00 amRNSHalf-year Report
22nd Jan 20247:00 amRNSCorporate Update
3rd Jan 202412:29 pmRNSBlock Listing Six Monthly Return
21st Dec 20237:00 amRNSResult of AGM
14th Dec 20238:34 amRNSReminder to Vote at AGM & Cascabel Update
8th Dec 20237:00 amRNSEspejo Project Update
5th Dec 20237:02 amRNSBlanca-Nieves Project Update
1st Dec 202312:37 pmRNSPorvenir Project Update
23rd Nov 20236:11 pmRNSNotice of AGM
23rd Nov 20235:32 pmRNSNotice of AGM
17th Nov 202311:46 amRNSDirector Changes
15th Nov 20237:00 amRNSQ1 Financial Report and MD&A
25th Oct 20237:00 amRNSSolGold Company Update
11th Oct 20233:45 pmRNSDirector/PDMR Shareholding
9th Oct 20233:37 pmRNSDirector/PDMR Shareholding
29th Sep 20237:00 amRNSAudited Full Year Results
20th Jul 20237:00 amRNSExploitation Agreement with Government of Ecuador
17th Jul 20237:00 amRNSInvestor Presentation
17th Jul 20237:00 amRNSRenewal for the Cascabel Project Concession
27th Jun 20237:00 amRNSBlock Listing Application
23rd Jun 20234:38 pmRNSDirector/PDMR Shareholding
16th Jun 202312:39 pmRNSTR-1: Notification of Major Holdings
15th Jun 20235:29 pmRNSInvestor Presentation
6th Jun 20234:06 pmRNSPCA Dealing
15th May 20237:00 amRNSThird-Quarter Financial Report and MD&A
11th May 20232:50 pmRNSShare Capital and Voting Rights
21st Apr 20236:08 pmRNSGrant of Options
17th Apr 20237:00 amRNSUpdated Share Capital and Voting Rights
6th Apr 20231:28 pmRNSHolding(s) in Company
20th Mar 20237:00 amRNSAppointment of CFO and CEO
3rd Mar 20235:35 pmRNSHolding(s) in Company
2nd Mar 20232:11 pmRNSHolding(s) in Company
2nd Mar 20232:10 pmRNSHolding(s) in Company
28th Feb 20235:22 pmRNSHolding(s) in Company
28th Feb 20234:30 pmRNSTotal Voting Rights
28th Feb 202310:38 amRNSHolding(s) in Company
28th Feb 202310:19 amRNSHolding(s) in Company
24th Feb 20231:49 pmRNSSolGold Completes Cornerstone Merger
22nd Feb 20232:51 pmRNSPublication of Prospectus
17th Feb 20237:00 amRNSCompany Update
14th Feb 20237:00 amRNSHalf-Yearly Financial Report and Quarterly MD&A
24th Jan 20237:00 amRNSCornerstone Acquisition Update
30th Dec 20227:00 amRNSUpdated Share Capital and Voting Rights
23rd Dec 20227:00 amRNSResults of the 2022 AGM

Due to London Stock Exchange licensing terms, we stipulate that you must be a private investor. We apologise for the inconvenience.

To access our Live RNS you must confirm you are a private investor by using the button below.

Login to your account

Don't have an account? Click here to register.

Quickpicks are a member only feature

Login to your account

Don't have an account? Click here to register.