Member Info for Dicko80

Morning all

Continuation of the breakout on the chart from Friday

Just need some news now 📈

Didn’t someone post a chart other day 🤪

Good weekend to all

Looks like a dirty trade 500k bought and sold 50mins later , by looks of the posts, someone on here 😂

I was thinking that but then not had an RNS so guess not

Pumpky yes took a stakeback in RRR, Let’s look at the facts

$20m RRR entitled 50%

Initial payment $5m

RRR have already been successful of the first 50% of the initial payment of 5,000,000+2,000,000 of interest costs for 4.5 million

It’s a process , that has taken time and now about timing

with the award already in place for the first 50% of 5,000,000 + $2m int and costs the balance of 20,000,000 pending award

A judgment has been rendered by the Cour de Cassation (Supreme Court) of the Democratic Republic of Congo (DRC) in relation to certain proceedings instituted by the Company. The Company awaits conclusion of the publication process and will then receive a copy, translate and review internally before releasing.

Buy limits down to 3.75m thats under £1k, can sell all i hold online

Buy limit down to 3.75m

https://ibb.co/cS5q3JLB

No sold out mid thirtys , timing wasn’t right

Just bought back only have 40m @ 0.225

They’ll take all 40m now , might be more

Buy limits as stated just over 10m

Buy limits down to just over 10m

Pumpky

I’ll have a pint of what your on

Hamilton

Nothing new I’m afraid , was waiting for a director purchase , but that was over a week ago

Seemingly they only buy off book , we want … on market ! 🤷‍♂️

Seemingly the limits changed after this tweet

https://x.com/rrr_redrock/status/1948393143230935145?s=46

3days after the interview , which they already tweeted 3 days ago

“Catch up “

catch up ? From just 3 days ago ?

Youve been able buy volume for last few days before selling

Are wenearly there yet ?

50m down to 20m

Not a chance Dan will pull this off

ROQ have 2 deals looking to close $23m vs £2m mkt cap

NFX no closer

So pulling it all together

They are apptoaching it "systemàtically"

Issues pteviously to 300m

Trying now to drill deeper 250m, to hit target zone

If succesful to reach target depth

Hope to encounter gold mineralisation at target depth, left open at depth in hole

Then review from there

They had issues previously to 300m

https://x.com/davidlenigas/status/1911839735179337866?s=46

We will know about right choice soon enough. From my experience up there, there is not a rig up there that can do 550m RC. If we look at what they did at Havieron - that was rotary mid bit to circa 400m and then diamond rail. But there are already a number of deepish holes at Hasties but obviously not drilled deep enough. All public info in that bit of info - so nothing insider there. So the question going forward is - Can some of these RC holes over the target be re-entered and diamond tailed. That would be ideal? Let’s see what the Company decides to say on all of this. Then we will all know.

Thats his take to the discussion on here

The company hasnt confirmed this

If you look back through his tweets , he said wasnt sure anything could drill to 550m

RC drilling completed in 2023 over the Red Setter Dome target penetrated to a maximum depth of 300m. The new modelling shows the target at a depth of approximately 550m. Figures 3 and 4 show two drill holes to be extended to target depth, for a total of 550m of drilling. The cover in the area which is mostly in the range of 50-100m depth means that drilling needs to be completed with care, and that good geological and geophysical management is undertaken, with a systematic approach

Figure 4: L1460 MMT showing resistive "domal" target as the blue colour, and drill hole 23RSRC003A to be extended from ~250m to ~550m as would be positioned near domal axis at depth.

Figure 5: L1470 MMT showing resistive "domal" target as the blue colour, with drill hole 23RSRC001 to be extended from ~300m to ~550m.

Ed Mead, Wishbone Gold WA director, commented; " Access routes have now been opened, and the drillers have mobilised to site and established the necessary site works to drill. As of yesterday, the rig was over the first of two drill holes that are to be deepened from around 300m depth down to around 550m target depth and had successfully run casing to near the bottom of the first hole. We expect further drilling towards the new target depths in the days ahead. "

Thanks egg

My thoghts they need wide mineralisation hits 150 -200m , which isnt going to happen if the target is only at planned TD

Yes but they are only drilling to where they believe the gold mineralisation starts and not drilling beyound

They need to drill much deeper to test the target

If the target is at 550m , why are they only drilling to 550m ?