Member Info for deltalo

Xxprolnvestorxx

Lol please,

So you don’t even know .

I’ll find you a link when I get time.

Chiller

Please explain your reasons to post that the WHR and the Helix accelerator is the same a turbo,.

Do you know how the WHR and the Helix accelerator works and how different a turbo is ?

WHR technology is completely different and uses heat as it’s power not exhaust pressure to ram in air like a turbo does.

Deltalo.

Here’s to your comment,

The Company is in discussions with potential strategic technology partners with experience in the CHP market and will announce any agreed collaboration once we have finalised budgets and timings.

Atb.

Phinx

It’s been long in the waiting but I believe the time is here. The updated website also says it all imo.

But you just sit back and watch this unfold. Enjoy.

As well as fuel and cost savings, Volvo collaborating with us for its marine engines thanks to scalability. The unit can be modified based on the heat source or the environment to produce a higher rate of power. They’re currently working on mid-range yachts but our solution can be modified to fit any size vessel and specification. The D13 engine we are working on is similar to the engines used by trucks in Volvo’s automotive division. Therefore there is a strong possibility we will apply this technology to the truck division after success in the marine sector.

https://www.inspirit-energy.com/industries/

SP should be a lot higher to be honest as the company enters an exciting time and a Turing point in its history.

Inspirit has also attracted interest to retrofit the Inspirit WHR appliance to a number of industrial engines for Combined Heat and Power (CHP) applications such as CAT, Jenbacher or Guascor gas engines.

Also Volvo mentioned in the updated website.

https://www.cat.com/en_GB/products/new/power-systems/electric-power.html

https://www.clarke-energy.com/gas-engines/

https://guascor-energy.com/about-us/

Strong buy imo.

The sp has only just begun,

Updated website and the Helix accelerator news to come, the sp moves fast here under little pressure.

Other news to come also…

Inspirit has also attracted interest to retrofit the Inspirit WHR appliance to a number of industrial engines for Combined Heat and Power (CHP) applications such as CAT, Jenbacher or Guascor gas engines.

Inspirit has also attracted interest to retrofit the Inspirit WHR appliance to a number of industrial engines for Combined Heat and Power (CHP) applications such as CAT, Jenbacher or Guascor gas engines.

https://www.clarke-energy.com/gas-engines/

https://www.cat.com/en_GB/products/new/power-systems/electric-power.html

https://guascor-energy.com/about-us/

When the heat retaining coatings gets rectified then the Helix accelerator will push the current 97kw to above 130kw.

not long now.

also,

The Company is in discussions with potential strategic technology partners with experience in the CHP market and will announce any agreed collaboration once we have finalised budgets and timings.

The 130 kw target is almost there.

At our recent test visit to our facility in Poland, we identified external manufacturing errors in one component part of the WHR system, this component having been specially manufactured with new heat retaining coatings for the drive that powers the Helix Accelerator, to deliver output of over 130kw.

So the heat retaining coatings that has now being rectified is all we’re waiting for.

We’ll see the contracts from the companies mentioned in the rns incoming soon after…

Inspirit has also attracted interest to retrofit the Inspirit WHR appliance to a number of industrial engines for Combined Heat and Power (CHP) applications such as CAT, Jenbacher or Guascor gas engines.

Volvo still mentioned in the updated website,

this company is about to takeoff imo.

https://www.inspirit-energy.com/industries/

We are at final stage 3 now to deliver targeted output of 131 kw. This is attracting

Potential investors and strategic technology partners including me.

As stated by the company,,,

The board of Inspirit has previously mentioned and still have no doubt that the technology the Company has developed could have a significant impact on applications within the automotive industry where manufacturers seek to enhance performance from the recovery and electrification of waste heat. The commercial potential would seem boundless and Inspirit is extremely optimistic about the commercial prospects for the business.

Phimx,

Also news on this…

Inspirit has also attracted interest to retrofit the Inspirit WHR appliance to a number of industrial engines for Combined Heat and Power (CHP) applications such as CAT, Jenbacher or Guascor gas engines. These engines modules are typically configured for the recovery of both electricity and heat via a cogeneration configuration and it is anticipated that the Inspirit engine could provide in excess of an additional 100kw of power from waste heat recovery, outperforming current WHR alternatives available in the market.

The Company is in discussions with potential strategic technology partners with experience in the CHP market and will announce any agreed collaboration once we have finalised budgets and timings.

Phimx

What’s your thoughts on the sp moving up 21 percent on only 19 million share’s?

I think there a background buyer involved but that’s just my opinion.

I’m expecting some good news soon but as I said yesterday, I’m willing to wait as long as it takes .

Atb.

Phimx

Not at all, I’ve traded in and out of Iog and Cine many time in the past and if you track back you’ll see when I sold as i stopped posting well before they finished .

I don’t chat on all my stocks but this one I see could give me in return many multiples from my 50m investment.

Just the right bit of good news and I’ll be very pleased indeed.

I don’t win on all my trades but I don’t make a habit of losing on many either.

I’m quite willing to wait for that news here and then trade in and out depending.

You’ve put strong sell and I’ll go strong buy.

Atb Phimx.

Just investors staring to notice this share again as we get closer to the WHR maximum and targeted 131kw output. Also the potential partners RNS in the CHP market as stated in the last update.

The Company is in discussions with potential strategic technology partners with experience in the CHP market and will announce any agreed collaboration once we have finalised budgets and timings.

Worth the wait imo.

Phimx

I believe that the wait will be well worthwhile.

The time has taken longer than expected to get the tech right , I believe it’s just about there now. I’m willing to add and hold . Atb.

A little delay yes but as explained, the problem with the heat coating has been resolved with a new manufacturing company.

Although this has caused delays whilst we secured alternative sources to manufacture this component, we are pleased to report that this component is now in design with the manufacturer confirming with confidence that it will meet the system requirements. During this period the team have continued to carry out longevity testing on stage one and two of the WHR system and it is now projected that should be completed by the 1st quarter of 2024.

Buying in time by the looks, mabe good news happening at last.

To be fair phimx , they wouldn’t be able to mention any other company in the rns if they weren’t interested.

Just shows that after all these year’s , i believe it’s coming to deliver back to shareholders big time imho.

It’s starting to gain interest again by the look’s,Atb

I agree, if just one of these big names like CAT, Jenbacher or Guascor sign an agreement with inspirit then the returns to shareholders will be huge.

Also as said in the latest update….

The Company is in discussions with potential strategic technology partners with experience in the CHP market and will announce any agreed collaboration once we have finalised budgets and timings.

Mkt cap only 660k, sp is 0.01515 to buy now.

I believe this will soon bounce up from here. Atb.