Castillo Coppe. Regulatory News (CCZ)

Castillo Copper Limited

+61 8 6558 0886

Simon Paull (Australia), Managing Director

Gerrard Hall (UK), Director

SI Capital Limited (Financial Adviser and Corporate Broker)

+44 (0)1483 413500

Nick Emerson

Luther Pendragon (Financial PR)

+44 (0)20 7618 9100 

Harry Chathli, Alexis Gore, Joe Quinlan

Criteria

JORC Code explanation

Commentary

Sampling techniques

· Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling.

· Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used.

· Aspects of the determination of mineralisation that are Material to the Public Report.

· In cases where 'industry standard' work has been done this would be relatively simple (eg 'reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay'). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.

· Three (3) entities completed rock chip sampling methods over at least four (4) separate surface sampling campaigns and are described in the current ASX Release, a generalised description of rock chip sample collection is presented here.

· Rock Chip Samples - were collected up to approximately a 5m radius around the recorded co-ordinate location. The rock chip fragments that were collected to make up the sample included a typical fragment size that approximately ranged from 2-5cm.

· Sub-sampling occurred as described in the section 'Sub-sampling techniques and sample preparation' in Section 1 of the current Table 1.

· The surface sample results described in this ASX Release are suitable for the reporting 'exploration results' for mineral prospectivity, additional exploration work would have to be completed to geologically model and then estimate a mineral resource.

Drilling techniques

· Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc).

· There are no historical drillholes in the Ayra -Sansa prospect area.

Drill sample recovery

· Method of recording and assessing core and chip sample recoveries and results assessed.

· Measures taken to maximise sample recovery and ensure representative nature of the samples.

· Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.

· No new drillholes samples were taken.

Logging

· Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies.

· Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography.

· The total length and percentage of the relevant intersections logged.

· No geological logging took place as no new holes were drilled.

Sub-sampling techniques and sample preparation

· If core, whether cut or sawn and whether quarter, half or all core taken.

· If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.

· For all sample types, the nature, quality and appropriateness of the sample preparation technique.

· Quality control procedures adopted for all sub-sampling stages to maximise representivity of samples.

· Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling.

· Whether sample sizes are appropriate to the grain size of the material being sampled.

· All surface samples were collected dry.

· BHP Minerals rock chip samples -sample location and assay data were extracted from an Appendix of the QDEX report using Optical Character Recognition, then underwent a correction or data QA/QC process to ensure that subsequent data extracted was "as reported".

· Mount Isa Mines - the sample location and assay data were extracted from QDEX report as .dat files.

· Mount Isa Mines - Typically for surface samples there were brief descriptions of the lithology etc is recorded within sample ledgers/registers.

· Mount Isa Metals - sample location and assay data were extracted from an Appendix of the QDEX report using Optical Character Recognition, then underwent a correction or data QA/QC process to ensure that subsequent data extracted was "as reported".

· The surface sample results described in this ASX Release are suitable for the reporting 'exploration results' for mineral prospectivity, additional exploration work would have to be completed in order to geologically model and then estimate a mineral resource.

Quality of assay data and laboratory tests

· The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total.

· For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc.

· Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have been established.

· The rock chip samples were dispatched for Assay to Amdel Analytical Laboratories at Mt Isa.

· The samples were digested by Aqua Regia and elemental analysis completed by Direct Optical Emission ICP: under Amdel Analytical Laboratory test method IC3E.

· Elements analysed by this method IC3E included Cu, Pb, Zn, Ag, As, Ba, Bi, Cd, Ci, Co, Fe, K, La, Mn, Mo, Na, Ni, Sn, Ta. Tl, and W. Not all batches, however, appear to have been analysed for all elements.

· Mount Isa Mines rock chip samples: o Elements analysed by this method could include Cu, Pb, Zn, Ag, As, Ba, Bi, Cd, Ci, Co, Fe, K, La, Mn, Mo, Na, Ni, Sn, Ta. Tl, and W. Not all batches, however, appear to have been analysed for all elements.

· Gold was assessed by sampling techniques in the field then assayed by method GI 142 which is a cyanidation technique (BCL or Bulk Cyanide Leach) bottle roll which had detection limits as low as 0.05 ppb Au.

· Rock chips were collected by taking a series of chips approximately 2 to 5cm in diameter across approx. a 3m radius of the outcrop being sampled. The sample was then crushed and analysed for a base metal suite by method GA 140.

· Rock chips analysed for gold included for some batches suite GG 326 comprising of a 30-gram charged fire assay fusion with carbon rod finish with detection limits down to 0.001 ppm Au. Some indicator element and whole rock analysis was undertaken by ICP-MS at Analabs.

· The Analabs analytical methods changed from March 1994, yet the same collection method appears to be comparable to earlier years:

· Analabs Assay methods employed for rock chip, soil, and stream sediment additionally included (for some campaigns):

· Method GI 142 (ICP) for elements Cu, Pb, Zn, Fe, Mn, Co, P, & As.

· Method GX401 (pressed powder XRF trace determination) for Ba; and Method GG334 (aqua regia with carbon rod finish) for Au.

· Detection limits across any year were suitable for detecting 'Trace Elements'. 'Ore grade' testing occurred when either, visible base metal minerals were present and/or were Cu, Pb, or Zn, exceeded 10,000ppm of the respective element.

· Mt Isa Metals rock chip samples were processed at a Commercial Laboratory, information in the QDEX report indicates that this was Analabs Townsville (which later fell under SGS ownership). Elemental Analysis for the assay results returned from the commercial laboratory were Cu, Pb, Zn, Ba, Co, and Au. It is assumed that the analytical testing suite is comparable to those reported for Mount Isa Mines Analabs suite.

Verification of sampling and assaying

· The verification of significant intersections by either independent or alternative company personnel.

· The use of twinned holes.

· Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols.

· Discuss any adjustment to assay data.

· Mount Isa Mines rock chip samples:

o Independent verification of surface samples had been completed for selected gold assay values.

o Analabs Townsville Assays checked against ALS Townsville Assays when high Au values were returned for stream sediment samples. The two sets of assay results generally showed an acceptable correlation, and this matched observations historically reported by Mount Isa Mines.

· BHP Minerals and Mount Isa Metals rock chip samples do not appear to have had any independent laboratory testing of the samples across different laboratories.

· The surface sample results described in this ASX Release are suitable for the reporting 'exploration results' for mineral prospectivity, additional exploration work would have to be completed to geologically model and then estimate a mineral resource.

Location of data points

· Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation.

· Specification of the grid system used.

· Quality and adequacy of topographic control.

· For rock chip samples positions were recorded by handheld GPS with areas highlighting anomalies sometimes returned to for additional sampling and locations checked by handheld GPS.

· Locational Data for BHP Minerals was in AMG66 and Mount Isa Mines was recorded in local grid and/or AMG84 zone 54 Easting (mE) and Northing (mN). There was no topographical control used for some locations.

· Locational Data for Mount Isa Metals was recorded in local grid and/or MGA94 zone 54 Easting (mE) and Northing (mN).

· The Arya rock chip sample dataset is anticipated on average to have up to a +/-20m horizontal level of accuracy in sample locations and range up to a +/-10m of accuracy in sample locations for vertical accuracy.

· Surface sample and assay data had been prepared and compiled into Manifold GIS System and all data converted to GDA94-Zone 54.

Data spacing and distribution

· Data spacing for reporting of Exploration Results.

· Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied.

· Whether sample compositing has been applied.

· For the Ayra surface sampling modelling for copper, the average RMS sample-to-sample spacing was as follows:

o Stream sediments 67m

o Soil 48m

o Rock chip 233m

Orientation of data in relation to geological structure

· Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type.

· If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.

· In general, the strike of the Surprise Creek Formation is east-northeast to east, dipping moderately to the north.

· For 'Arya' rock chips there was no fixed orientation as these methods were used in the first instance to define distinct areas of anomalisms, based on areas of observed surface mineralisation.

· For 'Arya' rock chips that produced significant anomalous values appear to be associated with the mapped fault, fault bounded breccia, and the Surprise Creek Formation 'PLrd' rock unit ('Prd' historical) that dominates the 'Arya' prospect to the south of the fault.

Sample security

· The measures taken to ensure sample security.

· There is no detailed record of sample security methods were employed in the field or by transport to the laboratory and measures taken in the laboratory by earlier explorers.

· Given the provenance of the data from historical explorers and the remoteness of the location, historical sample security is deemed adequate for the reporting of surface assay grades and trends.

Audits or reviews

· The results of any audits or reviews of sampling techniques and data.

No external reviews or audits have been undertaken, except for the Independent Geologists Report by SRK in 2019 for the LSE Listing and a review of the airborne and ground geophysics by the GeoDiscovery Group.

Note, the reference is: Nelson K., Review of open file EM and magnetic geophysical data at Ayra Prospect, GeoDiscovery Group, unpublished confidential report to Castillo Copper Limited, June 2021, 16pp.

Criteria

JORC Code explanation

Commentary

Mineral tenement and land tenure status

· Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings.

· The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.

· The following mineral tenures are held 100% by subsidiaries of Castillo Copper Limited, totalling an area of approximately 961km2 in the "Mt Oxide North project":

· EPM 26574 (Valparaisa North) - encompasses the Big One historical mineral resource, Holder Total Minerals Pty Ltd, granted 12-June-2018 for a 5-year period over 100 sub-blocks (323.3Km2), Expires 11-June-2023.

· EPM 26462 (Big Oxide North) - encompasses the 'Boomerang' historical mine and the 'Big One' historical mine, Holder: QLD Commodities Pty Ltd, granted: 29-Aug-2017 for a 5-year period over 67 sub-blocks (216.5Km2), Expires: 28-Aug-2022.

· EPM 26525 (Hill of Grace) - encompasses the Arya significant aeromagnetic anomaly, Holder: Total Minerals Pty Ltd for a 5-year period over 38 sub-blocks (128.8Km2), Granted: 12-June 2018, Expires: 11-June-2023.

· EPM 26513 (Torpedo Creek/Alpha Project) - Granted 13-Aug 2018 for a 5-year period over 23 sub-blocks (74.2Km2), Expires 12-Aug-2023; and

· EPM 27440 (The Wall) - An application was lodged on the 12-Dec2019 over 70 sub-blocks (~215Km2) by Castillo Copper Limited. The tenure was granted on the 7th March 2021.

Exploration done by other parties

· Acknowledgment and appraisal of exploration by other parties.

· A selection of historical QDEX / mineral exploration reports has been reviewed for historical tenures that cover or partially cover the Project Area in this announcement. Federal and State Government reports supplement the historical mineral exploration reporting (QDEX open file exploration records).

· Most explorers were searching for Cu-Au-U and/or Pb-Zn-Ag, and, proving satellite deposit style extensions to the several small sub-economic copper deposits (e.g., Big Oxide and Josephine).

· With the Mt Oxide Project in regional proximity to Mt Isa and numerous historical and active mines, the Project area has seen the historical mineral tenures subject to various styles of surface sampling, with selected locations typically targeted at specific locations within the Mt Oxide Pillar by shallow drilling (Total hole depth is typically less than 75m).

· The Mt Oxide project tenure package has a significant opportunity to be reviewed and explored by modern exploration methods in a coherent package of EPM's, with three of these forming a contiguous tenure package.

· Various Holders and related parties of the 'Big One' historical mining tenure (ML8451) completed a range of mining activities and exploration activities on what is now the 'Big One' prospect for EPM 26574. The following unpublished work is acknowledged in previous ASX reports:

o West Australian Metals NL, 1994. Drill Programme at the "Big One" Copper Deposit, North Queensland for West Australian Metals NL.

o Wilson, D., 2011. 'Big One' Copper Mine Lease 5481 Memorandum - dated 7 May 2011.

o Wilson, D., 2015. 'Big One' Mining Lease Memorandum - dated

o 25 May 2015: and

o Csar, M, 1996. Big One & Mt Storm Copper Deposits.

o Unpublished Xplore Resources field report Aug 2020.

· Arya prospect - the five (5) historical exploration reports generated by various explorers that contributed information and data to this ASX Release are detailed in the References section of the main body.

Geology

· Deposit type, geological setting and style of mineralisation.

· The Mt Oxide North project is located within the Mt Isa Inlier of western Queensland, a large, exposed section of Proterozoic (2.5 billion- to 540-million-year-old) crustal rocks. The inlier records a long history of tectonic evolution, now thought to be like that of the Broken Hill Block in western New South Wales.

· The Mt Oxide project lies within the Mt Oxide Domain, straddling the Lawn Hill Platform and Leichhardt River Fault Trough. The geology of the tenement is principally comprised of rocks of the Surprise Creek and Quilalar Formations which include feldspathic quartzites, conglomerates, arkosic grits, shales, siltstones and minor dolomites and limestones.

· The Mt Oxide Pillar project area is cut by a major fault zone, trending north-northeast to south-southwest across the permits. This fault is associated with major folding, forming several tight syncline and anticline structures along its length.

· The desktop studies commissioned by CCZ on the granted mineral tenures described four main styles of mineralisation account for most mineral resources within the rocks of the Mt Isa Province (after Withnall & Cranfield, 2013).

· Sediment hosted silver-lead-zinc - occurs mainly within fine grained sedimentary rocks of the Isa Super basin within the

· Western Fold Belt. Deposits include Black Star (Mount Isa PbZn), Century, George Fisher North, George Fisher South (Hilton) and Lady Loretta deposits.

· Brecciated sediment hosted copper - occurs dominantly within the Leichhardt, Calvert, and Isa Super basin of the Western Fold Belt, hosted in brecciated dolomitic, carbonaceous and pyritic sediments or brecciated rocks proximal to major fault/shear zones. Includes the Mount Isa copper orebodies and the Esperanza/Mammoth mineralisation.

· Iron-oxide-copper-gold ("IOCG") - predominantly chalcopyrite, pyrite magnetite/hematite mineralisation within high grade metamorphic rocks of the Eastern Fold Belt. Deposits of this style include Ernest Henry, Osborne, and Selwyn; and

· Broken Hill type silver-lead-zinc - occur within the high-grade metamorphic rocks of the Eastern Fold Belt. Cannington is the major example, but several smaller currently sub-economic deposits are known.

· Gold is primarily found associated with copper within the IOCG deposits of the Eastern Fold Belt. However, a significant exception is noted at Tick Hill where high grade gold mineralisation was produced, between 1991 and 1995 by Carpentaria Gold Pty Ltd, some 700 000 tonnes of ore was mined at an average grade of 22.5 g/t Au, producing 15 900 kg Au. The Tick Hill deposit style is poorly understood (Withnall & Cranfield, 2013).

· ROM Resources had noted in a series of recent reports for CCZ on the granted tenures, that cover the known mineralisation styles including:

o Stratabound copper mineralisation within ferruginous sandstones and siltstones of the Surprise Creek Formation.

o Disseminated copper associated with trachyte dykes.

o Copper-rich iron stones (possible IOCG) in E-W fault zones; and

o possible Mississippi Valley Type ("MVT") stockwork sulphide mineralisation carrying anomalous copper-lead-zinc and silver.

· The Mt Oxide and Mt Gordon occurrences are thought to be breccia and replacement zones with interconnecting faults. The Mt Gordon/Mammoth deposit is hosted by brittle quartzites, and Esperanza by carbonaceous shales. Mineralisation has been related to the Isan Orogeny (1,590 - 1,500 Ma).

· Mineralisation at all deposits is primarily chalcopyrite-pyrite-chalcocite, typically as massive sulphide within breccias.

· At the Big One prospect, West Australian Metals NL described the mineralisation as (as sourced from the document "West Australian Metals NL, 1994. Drill Programme at the "Big One" Copper Deposit, North Queensland for West Australian Metals NL."):

· The targeted lode / mineralised dyke is observable on the surface. The mineralisation targeted in the 1993 drilling programmed is a supergene copper mineralisation that includes malachite, azurite, cuprite, and tenorite, all associated with a NE trending fault (062o to 242o) that is intruded by a porphyry dyke.

· The mineralised porphyry dyke is vertical to near vertical (85o), with the 'true width' dimensions reaching up to 7m at surface. o At least 600m in strike length, with strong Malachite staining observed along the entire strike length, with historical open pits having targeted approximately 200m of this strike. Exact depth of mining below the original ground surface is not clear in the historical documents, given the pits are not battered it is anticipated that excavations have reached 5m to 10m beneath the original ground surface.

· Associated with the porphyry dyke are zones of fractured and/or sheared rock, the siltstones are described as brecciated, and sandstones around the shear as carbonaceous.

· The known mineralisation from the exploration activities to date had identified shallow supergene mineralisation, with a few drillholes targeting deeper mineralisation in and around the 200m of strike historical open A strongly altered hanging wall that contained malachite and cuprite nodules. Chalcocite mineralization has been identified but it is unclear on the prevalence of the Chalcocite; and The mineralisation was amenable to high grade open pit mining methods of the oxide mineralization (as indicated by numerous historical open pit shallow workings into the shear zone).

· Desktop studies commissioned by CCZ and completed by ROM Resources and SRK Exploration have determined that the Big One prospect is prospective for Cuco, and Ag.

· Desktop studies commissioned by CCZ have determined the Boomerang prospect contains:

· Secondary copper staining over ~800m of strike length.

· Associated with a major east-west trending fault that juxtaposes the upper Surprise Creek Formation sediments against both the underlying Bigie Formation and the upper Quilalar Formation units.

· At the 'Flapjack' prospect there is the potential for:

o Skarn mineralisation for Cu-Au and/or Zn-Pb-Cu from replacement carbonate mineralisation, particularly the Quilalar Formation.

o Thermal Gold Auroele mineralisation is a potential model due to the high silica alteration in thermal aureole with contact of A-Type Weberra Granite - related to the Au mineralisation; and/or

o IOCG mineralisation related to chloride-rich fluids.

· At the 'Crescent' prospect there is the potential for:

o Skarn mineralisation for Cu-Au and/or Zn-Pb-Cu from replacement carbonate mineralisation, particularly the Quilalar Formation; and/or

o Thermal Gold Auroele mineralisation is a potential model due to the high silica alteration in thermal aureole with contact of A-Type Weberra Granite - related to the Au mineralisation; and

o IOCG mineralisation related to potassic rich fluids.

· At the 'Arya' prospect there is the potential for:

o Supergene mineralisation forming at the surface along the fault, fault breccia, and the Surprise Creek Formation 'PLrd' rock unit

o ('Prd' historical).

o Epigenetic replacement mineralisation for Cu (with minor components of other base metals and gold) from replacement carbonate mineralisation, particularly the Surprise Creek Formation.

o Skarn mineralisation for Cu-Au and/or Zn-Pb-Cu from replacement carbonate mineralisation, particularly the Surprised Creek Formation; and/or

o IOCG mineralisation related to chloride rich fluids.

· A selection of publicly available QDEX documents / historical exploration reports have been reviewed, refer to Section 2, sub-section "Further Work" for both actions in progress and proposed future actions.

Drill hole Information

· A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes:

o easting and northing of the drill hole collar

o elevation or RL (Reduced Level - elevation above sea level in metres) of the drill hole collar

o dip and azimuth of the hole

o down hole length and interception depth

o hole length.

· If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case.

· There are no new drillholes completed, although fourteen (14) are planned. There is no historical drilling at Ayra.

Data aggregation methods

· In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated.

· Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail.

· The assumptions used for any reporting of metal equivalent values should be clearly stated.

· No data aggregation methods are utilised in the current ASX Release, since the sampling types are surface samples (for example: rock chip samples).

Relationship between mineralisation widths and intercept lengths

· These relationships are particularly important in the reporting of Exploration Results.

· If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported.

· If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg 'down hole length, true width not known').

· The strike of the country rock is northeast to east, with the deep Ayra conductor is orientated east - west. The smaller, shallower conductors strike north-northeast to northeast. The main faulting trends is northeast.

Diagrams

· Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.

· Appropriate diagrams are presented in the body and the Appendices of the current ASX Release. Where scales are absent from the diagram, grids have been included and clearly labelled to act as a scale for distance.

· Maps and Plans presented in the current ASX Release are in MGA94 Zone 54, Eastings (mN), and Northing (mN), unless clearly labelled otherwise.

Balanced reporting

· Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results.

· All surface sampling and ground and airborne geophysical data has been reported, there have been no results withheld.

Other substantive exploration data

· Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples - size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.

GEOTEM & PROTEM:

· The airborne electromagnetic GEOTEM geophysical survey undertaken by BHP Minerals in 1997 on historical tenure EPM11383 & EPM1152. A total of 726-line kilometres were flown on a SE-NW, flown by 'Geoterrex-Dighem Pty Limited' at a mean height of approximately 105m above the ground surface (line spacing 500m apart). Previous interpretations the penetration of the GEOTEM method to have an estimated range of between 200-300m below the ground surface, this is dependent on conductivity contrasts, size, and attitude of the subsurface targets. Eleven (11) anomalies were identified, with four (4) recommended for follow up, with three (3) of the four (4) anomalies followed up by ground geophysical at what CCZ calls the 'Arya' prospect. The BHP Minerals 1997 GEOTEM survey information was extracted from QDEX Data to accompany the QDEX report information.

· The 'Arya' prospect anomalies are EG01, EG02, EG10, with the geophysical observations of the body and Appendices of the current ASX Release, including the PROTEM observations. The PROTEM observations are anticipated to have a deeper penetration than the GEOTEM observations, based on the PROTEM loop, survey traverse, and/or depth sounding method applied.

QUESTEM & GENIE-EM:

· The airborne electromagnetic GEOTEM geophysical survey undertaken by Mount Isa Mines in 1991 on historical tenure EPM7448, EPM7338, and EPM7863. A total of approximately 600km-line kilometres (exact line length would need to be extracted from digitised images) would were flown on a SE-NW, flown by 'Aerodata Holdings Limited' at a mean height of approximately 120m above the ground surface (line spacing 400m apart). In a previous ASX release (July 2020) Xplore Resources Pty Ltd interprets the penetration of the QUESTEM method to have an estimated range of between 200-300m below the ground surface, this is dependent on conductivity contrasts, size, and attitude of the subsurface targets. Twentynine (29) anomalies were identified across the three (3) historical tenure, with six (6) recommended for follow up ground geophysical survey for historical tenure EPM7448, and one of these L4 near the Arya prospect.

· Arya prospect anomaly L4 followed up by a ground electromagnetic traverse by Mount Isa Mines GENIE-EM is to the west of the EG02 BHP minerals anomaly.

· Queensland Government Data: 'PLrd' rock unit lower boundary from the Surprise Creek Formation sourced from QSpatial and aligns with GeoResGlobe - this is equivalent to the historical tenure reports 'Prd' rock unit lower boundary from the Surprise Creek Formation.

GEODISCOVERY REVIEW

The study of Nelson (2021) concluded that:

· Whilst hard copies of the 1997 BHP ground EM data are available, no digital data is on open file. Hard copy profiles have been visually interpreted, however due to lack of digital data it cannot be remodelled. The historic BHP model results and survey locations have not been provided and there is uncertainty in the location of Anomaly E02.

· Magnetic modelling, CDI and LEI of the TEMPEST survey line indicate the BHP depth estimate of conductive from the EG01 sounding is likely over estimated. Depth to main conductive sources appears to be between around 200m beneath surface (Nelson (2021).

· EG02 appears to be associated with a fault and EG10 appears to be more surficial.

· It is recommended that the LEI of the TEMPEST survey (most recent AEM data acquired in the region), along with magnetic model output be used to plan the next drill campaign (Figure 10 - 12). The current drill plan could be improved to better test the modelled conductive sources and structural features.

· If the drill testing of the conductive sources indicates the presence of prospective lithologies and/or mineralisation, then consideration should be given to acquiring detailed ground EM and magnetic coverage to further assist targeting.

Figures A2-1 to A2-3 illustrate the above conclusions.

Further work

· The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling).

· Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially sensitive.

· Further work will consist of a combination of:

o Fourteen (14) hole RC drilling Program

o Soil and or Rock chip sampling

o Ground IP or EM Survey

Drill Order

SiteID

Easting (GDA94)

Northing (GDA94)

Total Depth (m)

Dip

Azimuth

Est. Days

Notes

Property

1

2021_AR01

353240

7865274

160

-60

165

1.5

Originally AR01

Kamileroi

2

2021_AR02

353258

7865419

160

-60

135

1.5

Originally AR02

Kamileroi

3

2021_AR03

352751

7865542

160

-60

245

1.5

Originally AR03

Kamileroi

4

2021_AR04

352775

7865583

160

-60

120

1.5

Originally AR04

Kamileroi

5

2021_AR05

352357

7865641

160

-90

0

1.5

Originally AR05

Kamileroi

6

2021_AR06

353574

7864724

160

-90

0

1.5

Originally AR06

Kamileroi

7

2021_AR10

351931

7865892

160

-60

270

1.5

Originally AR10

Morella

8

2021_AR11

352276

7865779

160

-60

125

1.5

Originally AR11

Morella

9

2021_AR12

352103

7865743

160

-60

200

1.5

Originally AR12

Morella

10

2021_AR13

352607

7865837

160

-75

0

1.5

Originally AR13

Morella

11

2021_AR14

351776

7865654

160

-60

290

1.5

Originally AR14

Kamileroi

12

2021_AR15

351813

7865789

160

-60

270

1.5

Added 04/06/21

Kamileroi

13

2021_AR16

351575

7865617

160

-60

340

1.5

Added 04/06/22

Kamileroi

14

2021_AR17

352531

7865612

160

-60

345

1.5

Added 04/06/23

Kamileroi

15

2021_AR18

352458

7865443

160

-60

270

1.5

Added 04/06/24

Kamileroi

16

2021_AR19

352984

7865449

160

-60

240

1.5

Added 04/06/25

Kamileroi