Roundtable Discussion; The Future of Mineral Sands. Watch the video here.
Those 7.8 are sells and so are some of the 8p. Lse works on mid prices and different brokers offer different prices. So those figure are false. Selling is alot higher.
Im doing dummy buy n sells and 2 different brokers are giving different prices for sells. So please dont go off the figures your being given from lse
Ive worked out the 5% fmv
20moz
Multiply by $1000 (pog-aisc)
Divide by 100 multply by 5=
1 billion dollars
650 million quid
Thank you sir
The only question is. Is it 20moz or 40moz? ?? ?? ??
P.s.
This is just to show you how silly your figures look
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
Here we go with your 3-6 posts '1 month old dodge account' you won't last long here, believe me.... Spreading FUD - fear uncertainty and doubt - over the bulk underground, because that's essentially the only unknown left that such disingenuous posts can target.
Last year we had months and months of tecnhical FUD with the GreenTool and others - who said Havieron would never be economic... but here we are 12 months later with a gigantic starter deposit, a $50m decline going in, and $50m GGP cash funding to DFS, and a published phase 1 mine PFS to take to the bank ... so NCM can get ore to Telfer ASAP.
You may be able to confuse and scare the un-researched with your manipulation, but you cannot touch Bamps or me.
For the rest of you MrBig is a skilled and devious operator who last night was attempting to exploit an ostensibly clever argument. The posts were subsequently removed this am. For the correct reasons.
What he/she was trying to do last night was apply NCM's conservative, underground stoping phase 1 mine operational costs @ $84/tonne - actually $81/tonne according to GGP using the correct exchange rate to Bulk Underground production.
The first Stoping operation has naturally has lower volumes, due to the inherent volume limitations of the Stoping technique and higher costs - ore transport to surface limitation, requirement for drill and blast / explosives, and extra material handling, and subsequence labour in back pasting costs )
But you cannot apply this to the anticipated Bulk under ground block caving grades of the larger scale deposit where the cost per tonne would be circa $25-27/tonne
This is a totally and fundamentally inappropriate comparison made by BiggL - It's like comparing two completely different company cost structures, AND specifically designed to imply that anything under 1.5g is likely to be 'uneconomic'...
And It's total BS becuase we ALL know that Cadia is economic down to 0.4g/t Au... specifically due the bulk efficiencies of the operational costs.
And very much like comparing and interweaving the cost structure of building Ferraris directly to Ford Fiestas -
IE both make massive profits, BUT in TOTALLY different ways . Obviously You cannot make a profit building Ford fiestas in the way you build a Ferrari though. That would be loss making.
That's the best analogy I can come up with. And that is the tactic of this poster. Always Happy to smash them into touch.
Expect Multiple shorter accounts with a very obvious agenda.s
Regarding bulk underground : The only question is will this be a block cave or a more selective sub level cave...? Anyone with mining nouse can see that.. The grade in those breccia are nothing short of sensational. And a mine in their own right.
The Indian billionaires behind the ailing Stanlow oil refinery have siphoned off more than £500 million in dividends in recent years. The Ruia brothers, whose Essar empire controls the refinery in Ellesmere Port that accounts for a sixth of Britain’s fuel supplies, have extracted $717 million (£518 million) from its UK arm since 2017. Stanlow is now fighting for its future after Covid crunched its finances. Essar Oil UK’s main business is Stanlow, which it bought from Shell for £801 million in 2011. - Sunday Times
Are you still thinking essar will get copl the licence for Nigeria