The next focusIR Investor Webinar takes places on 14th May with guest speakers from Blue Whale Growth Fund, Taseko Mines, Kavango Resources and CQS Natural Resources fund. Please register here.

Less Ads, More Data, More Tools Register for FREE

Asiamet Receives Key Approval for BKM Project

15 May 2020 07:00

RNS Number : 0324N
Asiamet Resources Limited
15 May 2020
 

 

15 May 2020

 

 

Asiamet Receives Key Approval for BKM Copper Project

 

 

Asiamet Resources Limited ("Asiamet or the "Company") is pleased to announce the Company has received a key approval for the BKM copper project, located in Central Kalimantan, Indonesia. The Governor of Central Kalimantan provides a recommendation for the project to proceed to the development and construction phase as part of the process required to secure a forestry borrow-to-use permit ("Pinjam Pakai", or "IPPKH-OP") from the Government of Indonesia.

 

IPPKH-OP / Pinjam Pakai

The BKM copper project overlaps with a forest area that allows commercial activities including mining. This overlap requires the project operator to obtain a 'borrow-to-use forestry permit' (Izin Pinjam Pakai Kawasan Hutan, IPPKH). To secure the Pinjam Pakai permit the Company needs to meet a number of requirements including the following three key milestones:

· Governor's Recommendation: To achieve this recommendation, the Company was required to demonstrate that the BKM copper project is technically viable and commercially robust with the project delivering a benefit to the local economy and community. Through the extensive studies and plans undertaken for the BKM feasibility study and our long term commitment to the local community through development programs, preferential local employment and procurement of goods and services, the Company was able to clearly demonstrate that the BKM copper project would deliver these objectives.

· Corridor Agreement: The access route from the BKM site to the intended port facilities utilises roads that have been or are being used and maintained by forestry concession holders. Asiamet is required to negotiate multi-user road access and maintenance with these concession holders. Access agreements of this nature are standard practice globally and the Company is in advanced discussions to secure the required agreements.

· Revised AMDAL: The AMDAL is an environmental impact assessment prepared by the Company for approval by the Provincial Government Environmental Agency. As a result of some changes in project scope such as port location and logistical routes, a number of surveys are required to update the current AMDAL. This revision will largely utilise the previous work and data already provided to the Indonesian Government and completed in the Feasibility Study.

Movement of personnel and government officials has been limited in light of Covid-19 and social distancing. The Company continues to monitor the situation with work on all permitting related workstreams above progressing with various surveys being scheduled and undertaken.

 

Upon completion of these three requirements along with a number of other administrative documents the Ministry of Environment and Forestry ('MoEF') is expected to issue a conditional approval for the Pinjam Pakai. The approval will be conditional upon fulfilment of several requirements, from the MoEF, including surveys for rehabilitation, finalisation of a reclamation bond, boundary tagging of borrow-to-use area and supporting facilities, and a timber utilisation permit.

 

Asiamet's Executive Chairman, Tony Manini commented:

"Having recently secured the forestry permit for exploration, Asiamet is very pleased to have now received the Governor's recommendation for the Pinjam Pakai permitting process. The Company's highly capable local teams in Jakarta and Palangkaraya continue to deliver these important milestones and clearly demonstrate our ability to continue advancing the BKM copper project towards final approvals for mine development, despite the challenges presented by Covid 19. The receipt of this approval from the Governor is very timely and while the value of this work is often under-estimated, the receipt of key approvals and permits serves to significantly de-risk and add substantial value to the project. The Company is making solid progress on other aspects of the Pinjam Pakai permitting process and will provide further updates as information comes to hand."

 

ON BEHALF OF THE BOARD OF DIRECTORS

Tony Manini, Executive Chairman

For further information, please contact:-Ends-

 

Tony ManiniExecutive Chairman, Asiamet Resources LimitedEmail: tony.manini@asiametresources.com

 

Investor Enquiries

Sasha Sethi

Telephone: +44 (0) 7891 677 441

Email: Sasha@flowcomms.com / info@asiametresources.com 

Blytheweigh Communications Limited

Tim Blythe/Megan Ray

Telephone: +44 (0)20 7138 3204

Email: Tim.Blythe@blytheweigh.com / Megan.Ray@blytheweigh.com

 

Asiamet Resources Nominated AdviserRFC Ambrian Limited

Bhavesh Patel / Stephen Allen

Telephone: +44 (0)20 3440 6800

Email: Bhavesh.Patel@rfcambrian.com / Stephen.Allen@rfcambrian.com 

 

Berenberg

Matthew Armitt, Detlir Elezi

Telephone: +44 20 3207 7800

Email: Matthew.Armitt@berenberg.com / Detlir.Elezi@berenberg.com

 

LiberumClayton Bush, Kane Collings

Telephone: +44 20 3100 2000

Email: clayton.bush@Liberum.com

 

Optiva Securities LimitedChristian Dennis

Telephone: +44 20 3137 1903

Email: Christian.Dennis@optivasecurities.com

 

 

Follow us on twitter @AsiametTweets

 

FORWARD-LOOKING STATEMENT

This news release contains forward-looking statements that are based on the Company's current expectations and estimates. Forward-looking statements are frequently characterised by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate", "suggest", "indicate" and other similar words or statements that certain events or conditions "may" or "will" occur. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements. Such factors include, among others: the actual results of current exploration activities; conclusions of economic evaluations; changes in project parameters as plans continue to be refined; possible variations in ore grade or recovery rates; accidents, labour disputes and other risks of the mining industry; delays in obtaining governmental approvals or financing; and fluctuations in metal prices. There may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.

 

This announcement contains inside information as stipulated under the Market Abuse Regulations (EU) no. 596/2014 ("MAR").

 

 

 

 

 

 

 

This information is provided by RNS, the news service of the London Stock Exchange. RNS is approved by the Financial Conduct Authority to act as a Primary Information Provider in the United Kingdom. Terms and conditions relating to the use and distribution of this information may apply. For further information, please contact rns@lseg.com or visit www.rns.com.
 
END
 
 
UPDAAMATMTIBMIM

Related Shares

Back to RNS

Due to London Stock Exchange licensing terms, we stipulate that you must be a private investor. We apologise for the inconvenience.

To access our Live RNS you must confirm you are a private investor by using the button below.

Login to your account

Don't have an account? Click here to register.

Quickpicks are a member only feature

Login to your account

Don't have an account? Click here to register.