London South East prides itself on its community spirit, and in order to keep the chat section problem free, we ask all members to follow these simple rules. In these rules, we refer to ourselves as "we", "us", "our". The user of the website is referred to as "you" and "your".
By posting on our share chat boards you are agreeing to the following:
The IP address of all posts is recorded to aid in enforcing these conditions. As a user you agree to any information you have entered being stored in a database. You agree that we have the right to remove, edit, move or close any topic or board at any time should we see fit. You agree that we have the right to remove any post without notice. You agree that we have the right to suspend your account without notice.
Please note some users may not behave properly and may post content that is misleading, untrue or offensive.
It is not possible for us to fully monitor all content all of the time but where we have actually received notice of any content that is potentially misleading, untrue, offensive, unlawful, infringes third party rights or is potentially in breach of these terms and conditions, then we will review such content, decide whether to remove it from this website and act accordingly.
Premium Members are members that have a premium subscription with London South East. You can subscribe here.
London South East does not endorse such members, and posts should not be construed as advice and represent the opinions of the authors, not those of London South East Ltd, or its affiliates.
About 20 km from tel aviv n bout 50km from the west bank.
Gaza strip Futher again.
Think enet will be fine, also Is Ra El having the best air defence system in world and also USA and rest will jump to Israel's aid now as it's Iran. Just glad not the Saudis as that would of been a much tricker situation for all.
With all this kicking off over the weekend. My thoughts are where are the products made? I know HQ is airport city next to tel aviv. Which is worrying!. Let's just hope all this settles down for the people in the area first and foremost. But it is concerning for investments too.
Up up
Up
DOWN.
Simple and concise.
6 ft 7.
You're still infatuated, happy wet dreams.
Make sure you set the alarm, those two shelves aren't going to stack themselves.
RNS1 Aug 2023 07:00
Ethernity's Passive Optical Network ("PON") controller technology can be used in different broadband network configurations and platforms including in fiber-to-the-premises ("FTTP"), fiber-to-the-building ("FTTB") and fiber-to-the-home/fiber-to-the-room ("FTTH"/"FTTR") (together, "FTTx"). This provides Ethernity with the opportunity to offer its PON solutions for a variety of different scenarios.
There is significant global investment in improving fiber connectivity, particularly in the EU, USA and India. FTTH Council Europe has estimated that by 2027 approximately 300 million homes will be connected to fiber. In the USA, $42.5 billion has been allocated to investment in broadband infrastructure projects pursuant to the "Broadband Equity, Access, and Deployment (BEAD) Program". With certain of those territories banning the use of products manufactured by Chinese system vendors, this has provided the opportunity for new vendors to enter the market.
Ethernity's go to market strategy is to provide an alternative source of PON technology for system vendors, by offering the Company's PON controller both on Field Programmable Gate Arrays ("FPGAs") and in application specific integrated circuits ("ASICs"), whilst combining its PON technology and flow processor switch technology onto a single ASIC, thereby delivering a complete Optical Line Terminal ("OLT") on a chip
Interview from new NED back in 2022 saying 50g PON will kick off in 2024
https://youtu.be/4MgaGSuVXGU?feature=shared
So we are involved the second generation 6ghz base node and hopefully in the future a 3rd incarnation.
Tarana are expanding which looks good for enet and away from Tarana the growth of PON, and Julie Kunsler being appointed on Tuesday and Ilan Tevet already working is setting enet up for growth, hopefully exponential growth.
RNs June 2023
David Levi, CEO of Ethernity Networks, commented: "The support we have provided to this customer over the past seven years has not only led to this expansion of their business, but also to ongoing development toward a second-generation FWA base station node. There is clearly significant value in our collaboration with our customers, as demonstrated by this order."
From Tarana website June 2023
Backward Compatibility
Another dilemma operators face is the introduction of new equipment, either as a replacement for existing equipment that is no longer in production or is installed for new functionality. With G1, operators are assured of backward compatibility for the next generation of equipment.
A good example of this is the upcoming 6 GHz base node that will be shipping soon. This base node will maintain compatibility with current 5 GHz remote nodes, avoiding the need for costly upgrades and truck rolls; further prolonging equipment lifetime
Skid , the only thing that can be guaranteed is next week you will still be a 67 year old nob. And that is a guarantee
6 Apr 2021 07:00
RNS Number : 4131U
Ethernity Networks Ltd
06 April 2021
6 April 2021
ETHERNITY NETWORKS LTD
("Ethernity" or the "Company")
Ethernity Networks Powers Packet Processing in Tarana's Breakthrough Fixed Wireless Product
Ethernity Networks (AIM: ENET.L), a leading supplier of data processing offload solutions on programmable hardware for acceleration of telco/cloud networks, announces that it has started receiving production orders for its ENET Flow Processor FPGA systems-on-chip (SoCs) from Tarana Wireless Inc. ("Tarana"), an American wireless broadband solution manufacturer. Ethernity FPGA SoCs provide complete IP networking functionality, including critical traffic management features, for Tarana's Gigabit 1 (G1) product.
Following a contract between Tarana and Ethernity signed in 2017, Ethernity has worked closely with Tarana to support its development efforts toward bringing their innovative fixed wireless access product to mass adoption. Tarana successfully completed field trials in 2020 and is now fulfilling orders from service providers for large-scale commercial deployments of G1, requiring supply of 5,000 units of Ethernity's ENET Flow Processor over the next 12 months. To that end, Ethernity has received initial orders for $400K to supply its FPGA SoCs, expected to be delivered by early Q3 2021, representing an acceleration of the previous expectation, as set out in the Company's update on 2 December 2020. Further growth of this product line is expected in 2022.
Tarana has developed its proprietary radio access network technology from the ground up, including custom silicon for RF (radio frequency) and digital signal processing, specifically to address the significant shortcomings of prior attempts at fixed wireless using technology repurposed from other applications (i.e. indoor Wi-Fi and mobile cellular). Given its purpose-built design in RF signal processing, G1 can provide fiber-class service from installations on existing cellular tower assets in non-line-of-sight conditions - and in unlicensed spectrum - with significantly improved performance and network economics than 5G for fixed broadband.
Ethernity has provided Tarana its unique silicon-tuned software, which, thanks to the efficiency of the ENET Flow Processor design, fits into low-cost FPGAs. Working in concert with Tarana's radio technology in its tower-installed base nodes, the ENET Flow Processor provides advanced networking functions, traffic control, and management for up to 512 homes per ENET SoC.
Ethernity CEO David Levi said: "We are very pleased to see Tarana progressing with our solution through multiple field trials and now entering mass deployment of their product. Our contribution to their G1 product helps carry intact their extremely high performance in the RF domain over into the IP domain, which we are confident will help this innovative technology gain additional traction with operators the world over. We are look
Jimbob.
Absolutely 100% guarantee there will not be a business update or contract announcement at the EGM.
Glad you are 67 but please take a chill pill and enjoy your weekend! Let ENET be Golden
I dont give an f about you , but you just spout negativity.
There will be no business update or contract announcement so you're correct nothing has changed.
Do you know this for 100% certainty NO.
So why say it
Jimbob.
You seem a little obsessed by me. I’m 6 7, receding hairline and getting on a bit so probably not your type, and before you ask no William Wragg stuff.
There he is, what a nob.
Ah OK. So more than likely no major news then. Pretty much as I thought. Could be a little tick up I suppose.
We expecting the addition of Julie Kunsler to be completed amongst another appointment and options.
Don't know if anyone is expecting a boom hopefully just another steady week in anticipation of contract news that will pretty much double last year's revenue. Contract news two OEMs looking to adopt next couple of Months. Stress next couple of months not by Tuesday.
Pwil.
It is an EGM not AGM.
It is specifically for approval of limited resolutions (board appointments, options).
There will be no business update or contract announcement so you're correct nothing has changed.
Next news may be the 2023 accounts, with the auditors being taken for a ride by MR last year I think major impairments on current and intangible assets so a lot of red ink.
So currently we are worth £4m. How do you feel we are worth 30m? I just don't see it. Last few contract values are less than 1m. I'm just curious. Thanks
Out of interest. Why? What will be announced at the AGM? Could be nothing then no boom.
DOWN.
Not the close I was hoping for, but Monday should be much better with the GM on Tuesday.
Have a good weekend everyone